Valve Brass Disconnect Valve Core Extractor/Installer 1/4 and 5/16 Double Size to Prevent Refrigerant Leaks for R12 R22 R410A

Professional Wizard Used to remove and install coils in live systems. Quick and easy replacement of leaking coils. Dual size for R410a or R22 charging systems or other upgrade replacement systems level.

Excellent workmanship: valve core removal installation tool is made of solid brass, which is durable and not easy to rust; the metal knob is designed with non-slip knurling, which is durable and can be used for a long period of time.

Time saving: coring tool, easy to insert into the inner valve, control the core, no need to stop or release the refrigerant, easy to remove and install the valve core, saves hours of dumping and charging time.

Basic operation of the valve core removal wrench:

1. Remove the dead center on the valve stem, close the valve on tool, adjust the connection between tool and air conditioner interface, and tighten the valve on the air conditioner.2. Make sure the tool is securely connected to the air conditioner valve, then open the valve on the tool. Push the valve stem into the A/C valve and gently turn the rear puller knob. Find the angle at which the coil is attached and release it.

3. After removing the valve core, remove the valve stem, close the valve on the disassembler, loosen the screw at the end of the tool and remove the valve core. Job accomplished!

Note: It is recommended to close the coil wrench valve and disconnect the internal connection of the air conditioner before removing the coil.

Specification: Items: Coil Removal Tool, R410a Coil Removal Tool, R22 Coil Removal Tool, Air Conditioning Coil Removal Tool, HVAC Valves, Coil Removal Tool, Schrader Coil Removal Tool, Service small split system refrigeration air conditioning under pressure.

Service ports: 1/4 and 5/16 female SAE thread

Bypass port: 1/4 male SAE thread

Yellow color

Material: Copper

Powerful: Coil installation tool is made of pure copper, the metal knob is designed to be non-slip, and Schrader coil cutting tool makes it easy to insert the coil inside to control the coil. No downtime, no need to release coolant, dual sizes 1/4 and 5/16 can adapt to R22/R134/R410/R32 RAIR conditions, external bypass port is designed with a removable spool.

Handle, ball joint, metal handle, handle, iron core handle, built-in magnet in the bottom base.

NOTE: Before removing valve core, close the valve and unplug the air conditioner.

1 set of SAE 1/4 and 5/16 coil removal and installation tools

Contains only the contents of the previous package, no other items.

Note: Photo lighting and different monitors may cause a slight difference between the color of the item in the picture and the actual color. Allowed measurement error is +/- 1 to 3 cm.