Valve core extractor/installer, SAE 1/4" and 5/16" brass disconnect valve, dual size, to prevent refrigerant leaks for R12, R22, and R410A.

General Description

SAE 1/4" and 5/16" brass valve core removal and installation tool, designed to prevent refrigerant leaks in R12, R22, and R410A systems.

This tool allows for the removal and installation of coils in operating systems, providing a quick and easy replacement of leaking coils.

Technical Specifications

Material:

Solid Brass Total Weight: 200 g

Service Ports: 1/4" and 5/16" SAE Female Thread

Band-off Port: 1/4" SAE Male Thread

Package Contents

1 coil remover installer, 1 coil remover, 10 5V1 valve cores

Installation

Remove the dead eye on the valve stem.

Close the valve on the tool and adjust the connection between the tool and the air conditioner interface.

Tighten the valve on the air conditioner.

Open the valve on the tool once it is properly connected.

Push the valve stem into the A/C valve and gently turn the rear knob of the extractor.

Release the coil after detaching it.

Use

This device is ideal for professionals and DIY enthusiasts, allowing easy connection to R22 or R410A systems.

It is designed for uninterrupted operation, without the need to release refrigerant, saving time when servicing air conditioning systems.

Other Information

Note