Valve core extractor/installer, SAE 1/4" and 5/16" brass disconnect valve, dual size, to prevent refrigerant leaks for R12, R22, and R410A.

General Description

SAE 1/4" and 5/16" brass valve core removal and installation tool, designed to prevent refrigerant leaks in R12, R22, and R410A systems. This tool allows for quick and easy replacement of leaking coils, while its solid brass construction ensures durability. It is equipped with a metal knob with anti-slip knurling for extended use.

Technical Specifications

• Material: Solid Brass
• Weight: 200 g
• SAE Female Thread: 1/4 and 5/16
• Band-by Port: SAE Male 1/4 Thread
• Package Contents: 1 Coil Remover Installer, 1 Coil Remover, 10 5V1 Valve Cores

Installation

• Remove the dead eye on the valve stem.
• Close the valve on the tool and adjust the connection between the tool and the air conditioner interface.
• Tighten the valve on the air conditioner.
• Open the valve on the tool once properly connected.
• Push Insert the valve stem into the A/C valve and gently turn the rear knob of the extractor.
• Remove the valve core by releasing the stem.

Use

Designed for professionals and experienced users, this tool allows for the inspection and replacement of valve cores without the need to release refrigerant, resulting in significant time savings when working on air conditioning systems.

Other Information

• Before removing the valve core, it is recommended to close the valve and disconnect the air conditioner.
• A slight color difference may appear between the image and the actual product due to lighting conditions.
• Measurement error allowed: +/- 1 to 3 cm.