Valve core extractor/installer, SAE 1/4" and 5/16" brass disconnect valve, dual size, to prevent refrigerant leaks for R12, R22, and R410A.

[Professional Assistant] Used to remove and install coils in live systems. Quick and easy replacement of leaking coils. Dual size for R410a or R22 charging systems or other upgrade replacement systems.

Excellent workmanship: The valve core removal tool is made of solid brass, which is durable and does not rust easily; the metal knob is designed with anti-slip knurling, which is durable and can be used for a long time.

Time saving: Core drilling tool, easy to insert into the inner valve, control the core, no need to stop or release the refrigerant, easy to remove and install the valve core, saves hours of draining and charging time.

Basic operation of the valve core removal wrench:

1. Remove the dead center on the valve stem, close the valve on the tool, adjust the connection between the tool and the air conditioner interface, and tighten the valve on the air conditioner.

2. Ensure the tool is securely connected to the air conditioner valve, then open the valve on the tool. Push the valve stem into the A/C valve and gently turn the rear knob of the extractor. Locate the angle at which the coil is attached and release it.

3. After removing the valve core, remove the valve stem, close the valve on the disassembler, loosen the screw at the end of the tool, and remove the valve core. Job done!

Note: It is recommended to close the coil wrench valve and disconnect the internal connection of the air conditioner before removing the coil.

Specification:

Items: Coil removal tool, R410a coil removal tool, R22 coil removal tool, air conditioning coil removal tool, HVAC valves, coil removal tool, Schrader coil removal tool, small pressurized split system refrigeration air conditioning service.

Service ports: 1/4" and 5/16" SAE female thread

Band-off port: 1/4" SAE male thread

Color: Yellow

Material: Copper

Package contents:

1 pc * coil remover installer

1 pc * coil remover

10 pcs * 5V1 valve core

Total weight: 200G

Features:

For the general public: Or professionals, do what you can, people who know this item

Suitable for: Easy connection to 1/4 or 5/16 system R22 or R410A Yes, dual size

Powerful: The coil installation tool is made of pure copper, the metal knob is designed to be non-slip, and the Schrader coil cutting tool makes it easy to insert the coil inside to control the coil. No downtime, no need to release coolant, dual 1/4" and 5/16" sizes can accommodate R22/R134/R410/R32 RAIR conditions, the external bypass port is designed with a removable coil.

Handle, ball joint, metal handle, grip, iron core handle, magnet integrated into the base.

NOTE: Before removing the valve core, close the valve and disconnect the air conditioner.

1 set of SAE 1/4" and 5/16" coil removal and installation tools

Only the above package contents are included, no other items.

Note: Photo lighting and different displays may cause a slight difference between the color of the item in the picture and the actual color.

Welcome to meet