Valve insert extractor/installation tool, SAE 1/4" and 5/16" brass isolation valve, dual size, for preventing refrigerant leaks for R12, R22 and R410A.--DTEKGAZ

General Description: Brass removal and installation tool (SAE 1/4" and 5/16") for preventing refrigerant leaks in R12, R22, and R410A systems. This tool allows for the removal and installation of evaporators in running systems, enabling quick and easy replacement of leaking evaporators. Technical Specifications: Material: Solid brass; Total weight: 200 g; Service connections: 1/4" and 5/16" SAE female threads. Bypass connection: 1/4" SAE male thread; Package includes: 1 x coil puller, 1 x coil extractor, 10 x 5V1 valve inserts; Installation: Remove the center cap on the valve stem. Close the valve on the tool and adjust the connection between the tool and the air conditioner connection. Tighten the valve on the air conditioner. Open the valve on the tool once the connection is correctly established. Push the valve stem into the air conditioner valve and carefully turn the rear knob of the puller. Remove the coil after removal. Application: This tool is ideal for professionals and DIY enthusiasts and allows for easy connection to R22 or R410A systems. It is designed for uninterrupted operation without refrigerant discharge, thus saving time during air conditioner maintenance. Other information: Note: It is recommended to close the valve on the coil puller and disconnect the internal air conditioner connection before removing the coil. Due to lighting conditions during photography and different screen settings, slight color variations may occur. These may occur. Permissible measurement error: +/- 1 to 3 cm.