Variable frequency drive vector controller, three-phase, 340-440V input, 0-440V output, 2.2kW, 5.1A

Features:1. Reliable Operation: All internal components use SMD design, which significantly increases the frequency inverter's stability.
2. Easy to Use: The clear control panel and digital display provide excellent visibility and convenient control.
3. Fast Cooling: The extra-large heat sink is also equipped with a low-noise cooling fan, ensuring rapid heat dissipation.
4. Good Material: Made from flame-retardant ABS material, this frequency inverter is highly impact-resistant.
5. Safer operation: The high-end motherboard provides good protection and high safety for the 340-440V three-phase input and 0-440V output.
Specifications:Item type: Frequency inverter
Material: ABS
Storage temperature: -25℃~+55℃
Input voltage: Three-phase 340-440V AC.Output voltage: three-phase 0-440 V AC.

Package List:

1 x Frequency Inverter

1 x User Manual

Note:

1. Before wiring, please confirm whether the input power supply is off. 2. For wiring work, please ask professional electrical engineers to do it..3. The grounding terminal must be grounded. 4. After completing the wiring of the emergency stop circuit, be sure to check whether the action is valid. 5. Do not connect the inverter output wire to the shell or short circuit the output wire. 6. Please confirm whether the voltage of the AC main circuit power supply is consistent with the rated voltage of the inverter. 7. Do not perform a withstand voltage test on the inverter. 8. Please connect the brake resistor according to the wiring diagram.9.Do not connect the power cord to the U, V, W output terminals.10. Do not connect the contactor to the output circuit.11. Be sure to install the protective cover before power on. When removing the cover, be sure to unplug the power. 12. The inverter which selects the reset and retry function should not be close to the mechanical equipment, because it will restart suddenly when the alarm stops.13. After confirming that the operation signal is cut off, the alarm can be reset. If the alarm is reset while the signal is on, the inverter may start suddenly. 14. Do not touch the terminals of the inverter because there is high voltage on the terminals, which is very dangerous. 15. During power-on, do not change the wiring or disassemble the terminal.16.Disconnect the power to the main circuit before performing inspection and maintenance.17.Do not modify the inverter without authorization.18.Please note