W11096268 w10758829 Water inlet valve - w10853296 suitable for Kenmore swirl washers - W10632527 w11220230 exact water inlet valve wtw7300dw1, wtw8500dc5, etc.

-- The W11096268 W10758829 water inlet valve controls the water flow into the washing machine. It has two 1.06-inch diameter threaded ports for connecting to the hot and cold water hoses at the rear of the washing machine. Each port is controlled by a solenoid valve which sends electrical energy to open and close the flow of hot and cold water according to the washing temperature parameters and the signals from the water level switch

- The water inlet valve W11096268 replaces W11220230, W10632527, W10758829, W10853296, 4591408, AP6329544, PS12349461, EAP12349461 for the Whirlpool, Ken-more, May-tag washing machine. ★ Compatible with the following models: WTW7000DW4, WTW8040DW0, 11026132412, 11020372710, 11020372711, 11026132410, 11026132411, 7MWTW7000EW0, 7MWTW7000EW1, 7MWTW7300EW0, 7MWTW7300EW1, MVW6200KW0, MVW6200KW1, MVW6200KW2, MVW6230HC0, MVW6230HC1, MVW6230HC, etc. Water inlet valve W11096268 W10758829 supports 5-YEAR after-sales service. ★ It can correct the following symptoms: ① when error codes such as E1, F8, FL, LF, LO are displayed on your washing machine, ② the washer not filling properly or not filling at all, ③ leaking inlet valve, ④ hot/cold water not being accepted in the washing machine, ⑤ cannot operate or is washing at Incorrect water temperature

-- The washing machine water inlet valve W11096268 (120V 60Hz) is designed with two threaded valves with blue and red mesh inserts, which can connect to the corresponding hot and cold water pipe ports at the rear of the washing machine. This is a new, genuine Whirlpool replacement part. ★ Replaces part numbers: wtw7000dw2, wtw7000dw3, wtw7040dw0, wtw7040dw1, wtw7040dw2, wtw7120hc0, wtw7300dc0, wtw7300dw0, wtw7300dw1, wtw7300dw2, wtw8000dw1, wtw8000dw2, wtw8000dw3, wtw8000dw4, wtw8000dw5, wtw8040dw1, wtw8040dw2, wtw8040dw3, etc.

-- Unplug the washer and turn off the power before installing this W11096268 W10758829 water inlet valve. The necessary tools are screwdrivers, pliers, and wrenches. Start by turning the electrical connections of the old valve with pliers. Removing them will give you better access to the screws that hold the inlet valve in place. Next, the old valve is removed, the new valve is pushed in, everything else is tightened, the pipe is connected, and the water is turned on.