Wall Mount for Power Strip, Punch-Free Self-Adhesive Smart Power Strip Mount for Plug-in Socket Holder, Wall/Desktop, Power Strip/WiFi Router and Remote Control (4pcs)

Power strip holder, no more hole on the wall, for power strips, surge protector, Wifi router, paper towel boxes, remote control, photo frame, wall clock, cabinet light, etc.


Only 4 steps to use:
1. Wipe the wall then tear off the acrylic glue.
2. Clean the wall then stick the bracket on the wall. (Press the bracket to remove the adhesive bubble.)
3. Remove the secondary buckle then stick it on the power strip.
4. Insert the power strip onto the wall.


Note:
1. Before use, please clean the wall and power strips well and press the backing
2. Please press the backing to remove the adhesive bubble, this will help stick the backing into the wall better.
3. Please do not put the adhesive in water or its viscosity may be weakened, so it is very difficult to stick again.
4. If you want to remove the backing, please heat the adhesive to soften it using a hair dryer or heat gun, you can remove the backing without leaving any residue in this way.
5. We advise you not to stick on the lime wall, if the adhesiveness will be weak, the backing may fall off the lime wall in a short time.