Article no.: 300-31-10
Manufacturing country / region: Germany
Basic colour: white
Model no.: PROFHOME | 300-31-10
Volume: 125 l
Coverage: approx. 800 m2
Consumption: approx. 150 ml/m2
Specifications: good coverage, low odour, water thinnable, emission and solvent free, tintable with various paints
Wet abrasion resistance: 3
Covering power: 1
Gloss level: dull matt
Product type: Wall paint
All purpose paint for interior walls and ceilings "Objektweiß" | well covering paint white matt
Highly economical, tried and tested, filling paint for walls and ceilings, well covering and easy to apply. With PROFHOME® wall paint "Objektweiß" you get a product of highest quality with class 1 hiding power and class 3 wet scrub resistance (EN 13300). This is the best choice for a very good coating result. Perfect for renovation as well as for refreshing the existing paint. Free from harmful emissions, solvent-free, water-dilutable, anti-drop, environmentally friendly.
Applicable on all paintable textured non-woven wallpaper, woodchip and embossed wallpaper, renovation wall liner, old dispersion coatings, plasterboard and cement particle board, brickwork and interior plaster (textured plaster, machine applied plaster, mineral plasters such as lime/cement plaster) and concrete.
Application rate: approx. 150 ml/m2 depending on the absorptivity of the underground material. 125 litres are sufficient for approx. 800 m2. Recommended to test the individual absorptivity in advance.
The surface to paint shall be smooth, clean, dry, absorptive and stable. In case of very absorbent underground material it is strongly recommended to treat the surface in advance with an adequate primer in order to achieve a reasonable paint application rate. Repair fissures and gaps with filler. Remove unevennesses.
Application: coat with brush, paint-brush, roller, spraying devices or airless painting devices.
For base coatings dilute with 5 % water. Temperature for application: minimum + 5°C air and surface temperature during application and drying time. Clean the working equipment with water after use.
- good covering power, tried and tested, highly economical
- free from harmful emissions, without odour
- dilutable with water, environmentally friendly
- tintable with standard coloured tints
Ingredients according to VdL RL01 (German Association of Lacquer and Paint Industry directive): synthetic resin dispersion, white pigment, calcium carbonate, silicates, water, additives. EU threshold for this product cat. A/a: 30g/l (2010). This product contains maximum 1 g/l VOC.