1/5
Drill Pump for Water and Oil - Fuel/Diesel Pump Nozzle for Electric Drill - Self-Priming with Fittings - For Aquarium, Pond, Statue, Garden Fountain
Sold by COOCHEER and 1 other seller
You may also like
Compare with similar items
Product information
Description
General Description
The electric borehole water pump is made of ABS and alloy, offering high hardness and excellent sealing. Before each use, it is advisable to wipe it with lubricating oil and rinse it with clean water. To extend its lifespan, add a filter to the inlet pipe when pumping abrasives and liquids containing solids.Technical Specifications
- Operating Temperature Range: 5 to 49 degrees Celsius
- Flow Rate at 1500 rpm: 15 L per minute
- Flow Rate at 3000 rpm: 30 L per minute
- Recommended Speed: 1500 to 3500 rpm
- Maximum Hose Length: 2.75 meters (9 feet)
Compatibility and Accessories
- Can be used as a water pump
- Suitable for swimming pools, aquariums, and fountains
- Recommended accessory: filter on the inlet pipe
Installation
Before use, check that the hose Ensure the inlet is properly sealed and the pump is correctly installed. It is best to add a sealing ring to the interface to prevent leaks. Also, make sure that any air in the oil pump has been purged.Operation
This pump is powered by an electric drill. After starting, check within 15 to 20 seconds if fluid is being drawn into the pump. If not, check the installation of the oil inlet hose. Do not allow the pump to run dry or operate it in reverse.Other Information
The pump is compact, lightweight, and easily portable, making it ideal for use on various work sites and thus saving significant time.Features
- BrandCOOCHEER
- MaterialAcrylonitrile butadiene styrene (ABS)
- power supplyElectric
- Liquid for compatibilityOil
- Self-primingYes
You are here:

















