Water Electrolyzer - Portable Water Quality Tester, Lightweight Water Impurity Monitor, Easy-to-Use Electrolyzer Test Monitor

Methord Usage: Ready to test water? Take two 100-150 ml white glasses, one of still water and the other of water, and place them on a table. To test, place the electrolyzer on the glass and plug in the 220V power supply. Inspection: Press the ON button to start the test. The typical test time is 30 seconds. Do not hold the electrodes with your hands after turning them on; do not immerse your fingers in the test water; to avoid product leakage. The product's metal rods are made of two materials (aluminum * 2, iron * 2). The aluminum rods appear lighter and whiter, and their mounting position has specific requirements; therefore, it cannot be random. Otherwise, the product will have no effect. As shown in the image, the red circle is used to install the aluminum rod and the red arrow is used to install the iron rod. Once the electrolyzer is empty, a dry cloth is used to dry the electrode and the water on the iron rod is wiped with gauze and stored properly. Test analysis results: Yellow: Sodium, silicon compounds, organic minerals, molybdenum, silicon, fluoride and other organic substances. Green: Arsenic (arsenic), mercury, lead, copper, sodium. Blue: Bacteria, viruses, carcinogens, organic phosphorus. Red: Iron and rust, bacteria. White: Lead, zinc, mercury, inorganic dirt. Black: Heavy metals (zinc, lead, copper, chromium, manganese, cadmium). Water quality standards: It does not contain harmful substances or odors (especially heavy metals and organic compounds). Water softness and hardness, generally between 50 and 200 mg/l (as calcium carbonate).