Water Oil Drill Pump, Electric Drill Fuel Oil Diesel Pump Tip, Self-Priming Drilling Oil Fittings, for Aquarium Pond Statuary Fountain Garden

General description The Water Oil Drill Pump is a versatile electric drill fuel oil diesel pump designed for efficient self-priming operation. Made from durable ABS and alloy materials, this pump features high hardness and excellent sealing capabilities, making it suitable for various applications including aquariums, ponds, fountains, and household cleaning. Technical specifications Material: ABS and alloy Operating temperature range: 5-49 degrees Celsius Flow rate at 1500 rpm: 15L per minute Flow rate at 3000 rpm: 30L per minute Recommended operating speed: 1500 to 3500 rpm Maximum inlet pipe length: 2.75 meters (9 feet) Installation Ensure the inlet pipe is sealed before use. Install a sealing ring at the interface to prevent leakage. Check that the pump is correctly installed and that air has been emptied from the oil pump. Usage Driven by an electric drill, start the pump and check for fluid suction within 15 to 20 seconds. If no fluid is sucked, verify the correct installation of the oil inlet pipe. Do not allow the pump to run dry. Avoid operating the pump in reverse. Other information Before each use, wipe the pump with lubricating oil and rinse with clean water afterward. When pumping abrasives or liquids with solids, use a filter on the inlet pipeline for longer service life. The pump is lightweight and portable, making it easy to carry and use in various locations.