water pump auto-amorcante DC 12V 60W Flow 5L/min Pressure 116Psi Height suction 1,5m For cleaning and systems solar

General Description

This pump to micro diaphragme DC high-quality is equipped a pressure which allows a operation automatic. It itself cutting when the pressure of output water reaches a level sufficient and redemarre when the pressure diminue. It is recommended of not make operate the pump to dry during a long period. This model is ideal for applications requiring economical energy and commutations frequentes, as the washing in machine, power supply in water systems solar, and the control automatic of water.

Technical Specifications

Volt: DC12V

Power : 60W

Flow : 5L/min

Pressure of service maximum: 116psi (0,8MPA)

Height suction: 1,5 meter

Ascenseur of the pump : 50 meters

Size : approx. 9,9 x 16,7 cm

Length of line : approx. 29 cm

Diameter outdoor of the interface : approx. 10,8 mm

Diameter interior of the interface: approx. 6 mm

Package Weight : 688 g

Application : used in industry, agriculture, the modification of vehicles, the cleaning and the processing of water.

Compatibility and Accessories

The interface input and of output water itself connect easily with hoses in silicone PE or COULD. Package included : 1 x pump auto-amorante.

Installation

The direction with a small fleche on the pump indicates the output water. The wires are not divises in poles positions and negative. The pump can be placed in any important direction.

Use

not make operate the pump to dry. The pressure stop is adjusted at the factory and must not be adjusted without precaution. Prevent of transmissions impurities for prevent the blocking. Use a hose input short, exceeding not 1,5 meter. not transmissions of liquid acid or alcalins forts.

Other Information

In case of non-utilization extended, add few drops water in the port of the pump for retablir suction. Check the connections wires if the pump works not.