Waterfall fountain for above-ground pool, height-adjustable refreshing jet, stand for outdoor garden pond, compatible with most 3-3 jets.

Adjustable Height Angle: The direction and height of the cascading pool fountain nozzle are adjustable, up to 5 meters. This depends on the pump used. If there is no pump, it will not work, but a larger pump should be used for a better cascading effect. With Side Valve: You can open and close the side valve to force more water through the water dispenser or allow more water directly into the pool. You can adjust the power of the water cover and pump to control the spray height. Easy to Install: The pool fountain can be screwed into the oil return port of the booster pump. The booster pump's outer thread is 3.8 cm and the inner thread is 5.6 cm, which is suitable for most eye sizes. The inexpensive sprinkler function can be used in any above-ground or in-ground pool and can be emptied into the water when not in use. Ball joint: The pond waterfall has a ball joint underwater, so you can keep the fountain's direction away from the edge of the pool to prevent water from falling out. Wide application: The waterfall fountain is suitable for most types of pools, above-ground and in-ground pools, hot springs, ponds, and spas, especially in dry and hot locations, making it suitable for small pools, spas, and ponds. The spray is adjustable in direction and height up to 14 inches (35.6 cm). Connects to your existing return line in minutes and fits standard 1 1/2" threaded return jet fittings. Uses an existing pool pump (3/4 HP or better required) to operate. Self-contained pool fountains help cool or heat the water. Water temperature. Installation steps: 1. Connect the tubes and tighten them. 2. Install the pool fountain onto the pool pump and tighten the connection. Open the pool outlet and adjust the angle and direction of the waterfall.