Drill Pump for Water and Oil, Fuel/Diesel Pump Nozzle for Electric Drill, Self-Priming with Fittings for Aquarium, Pond, Statue, Garden Fountain

General Description: The electric borehole water pump is made of ABS and alloy, offering high hardness and excellent sealing. Before each use, it is advisable to wipe it with lubricating oil and rinse it with clean water. To extend its lifespan, add a filter to the inlet pipe when pumping abrasives and liquids containing solids. Technical Specifications: Operating Temperature Range: 5 to 49 degrees Celsius; Flow Rate at 1500 rpm: 15 L per minute; Flow Rate at 3000 rpm: 30 L per minute; Recommended Speed: 1500 to 3500 rpm; Maximum Hose Length: 2.75 meters (9 feet). Compatibility and Accessories: Can be used as a water pump; Suitable for swimming pools, aquariums, and fountains. Recommended Accessories: Inlet pipe filter. Installation: Before use, check that the inlet hose is properly sealed and that the pump is correctly installed. It is best to add a sealing ring to the interface to prevent leaks. Also, ensure that any air in the oil pump has been purged. Operation: This pump is powered by an electric drill. After starting, check within 15 to 20 seconds whether fluid is being drawn into the pump. If not, check the oil inlet hose installation. Do not allow the pump to run dry or operate it in reverse. Other information: The pump is compact, lightweight, and easily transportable, making it ideal for use at various work sites and thus saving significant time.