Waterproof IC card reader, fully sealed LED indicator, 125KHz contactless security reader for home office

Features:1.The fully sealed design allows users to install it outdoors and in other harsh conditions, without mechanical wear and tear, ensuring durability.
2.It boasts high sensitivity, high current, a single DC power supply, a low price, and high-performance characteristics.
3.This is a 125kHz contactless access control reader, utilizing an advanced RF receiver circuit and an integrated microcontroller, combined with efficient decoding algorithms.
4.Applicable to access control, time and attendance, fee management, and other RFID applications.
5.Equipped with 2 LEDs, blue indicates standby, green indicates successful reader operation.
Specifications:Brief introduction:
This is a 125 kHz contactless access control reader that utilizes an advanced RF receiver circuit design and an integrated microcontroller, combined with efficient decoding algorithms.It features high sensitivity, high current, a single DC power supply, a low price, and high performance characteristics.The fully sealed design, resistant to dust and moisture, allows users to install it outdoors and in other harsh conditions without mechanical wear or compromising durability.0-100mA
Supported boards: TK4001\EM4100 etc.
Reading range: 0mm-100mm (depending on the board or environment)
Reading interval: Format: Wiegand 26/Wiegand 34 (Self-adjustable)
Transmission distance: WG26/34≥100M
Operating temperature: -25℃ ~ +75℃
Size: 28mm x 80mm x 12mm
Weight: Approx. 60G
Wire length: 180mm ± 5mm
Material: PVC and adhesive resin (it is waterproof)
Status indication: 2 PC LEDs (blue means standby, green means successful reading)
Definition of the Line:
Red: VCC (8V-15V)
Black: GND
White: Wiegand D1
Green: Wiegand D0
Gray: Green light and long buzzer
Purple: Wiegand 26/Wiegand 34 (the output format is WG34 when the purple line is connected to the black line)
Notes:
1.Disconnect the power and do not operate the device during installation or removal.
2.The reader must be installed on a wooden, concrete, or brick wall, or placed on a table.There cannot be a large area of ​​steel products within a radius of approximately 10 centimeters.
3.Different cards affect the reader's distance.
4.If the reader's distance between two machines