Waterproof Non-Slip Self-Adhesive Bathroom Flooring

Self-adhesive pear wood effect flooring for bathroom, 60 cm x 5 m

This self-adhesive floor film is designed to easily renovate an indoor floor without undertaking major works. Thanks to its pear wood effect finish, it brings a warm and neat look while remaining suitable for damp rooms such as the bathroom, toilet or utility room. Its thickened structure with waterproof protection helps protect the existing surface against everyday moisture and makes maintenance easier. This self-adhesive covering is perfectly suitable for modernising an old floor, concealing a worn surface or improving the appearance of a space with simple installation.

Key points

• Practical adhesive surface for quick renovation
• Pear wood effect finish, natural and decorative appearance
• Reinforced thick version for better hold
• Waterproof protection suitable for damp environments
• Surface designed to limit slipping in wet rooms
• Roll format easy to cut according to requirements
• Cost-effective solution for covering an existing floor

Recommended use

This self-adhesive flooring is particularly suitable for domestic spaces where a simple renovation solution is required. It can be used in a bathroom, toilet, entrance hall, kitchen, utility room or small storage space. Its wood look allows the product to blend easily into contemporary, understated or more classic interiors. It is recommended for flat, clean and dry surfaces in order to obtain good adhesion.

Product features

• Self-adhesive floor film in roll form
• Pear wood pattern for a natural visual finish
• Reinforced thickness for a better feeling of coverage
• Waterproof covering for use in damp rooms
• Installation without additional glue under normal installation conditions
• Can be cut to fit corners and contours
• Easy maintenance with a soft cloth or a slightly damp mop

Technical parameters

• Product type: self-adhesive floor sticker, renovation covering
• Product name: self-adhesive pear wood effect flooring
• Pattern: wood grain
• Colour: pear wood
• Format: roll
• Dimensions: 60 cm x 5 m
• Approximate covered area: 3 m²
• Weight: 0.7 kg
• Indicated thickness: approximately 0.35 cm according to the information provided
• Package length: 500 cm
• Width: 60 cm
• Main feature: waterproof, self-adhesive, floor renovation
• Use: indoor
• Compatible rooms: bathroom, toilet, domestic damp areas
• Installation: direct adhesive application on prepared surface

Installation and usage advice

Before installation, it is advisable to thoroughly clean the floor to remove dust, grease marks and residual moisture. The surface must be smooth, dry, stable and clean. For more precise installation, it is recommended to measure the area to be covered and then cut the roll allowing for a slight margin. Apply the covering gradually, removing the adhesive backing as you go, in order to avoid creases and air bubbles. Regular pressure with a flexible squeegee or a dry cloth helps improve adhesion.

For better durability, avoid installation on a crumbly, uneven floor or one continuously exposed to standing water. In a bathroom or toilet, it is preferable to ventilate the room well and check the condition of the surface before installation. This product is intended for light and decorative renovation of an indoor floor.

Package contents

• 1 roll of self-adhesive pear wood effect flooring
• Roll dimensions: 60 cm x 5 m

This waterproof self-adhesive flooring represents a practical solution for refreshing an interior without fully replacing the existing floor. Its wood finish, simplified installation and generous format make it a suitable choice for users looking for bathroom floor film, a non-slip floor sticker or a self-adhesive covering for domestic renovation.