Waterproof Non-Slip Self-Adhesive Flooring Bathroom

Waterproof self-adhesive floor covering for bathroom, kitchen and WC, pearly white grid finish, 60 cm x 5 m

This self-adhesive floor film is a practical solution for quickly renovating an indoor floor without major work. Designed for rooms exposed to moisture, it is particularly suitable for the bathroom, toilet, utility room or certain kitchen areas. Its pearly white finish with a grid pattern provides a clean, bright and understated look, easy to integrate into a contemporary or classic interior.

Thanks to its self-adhesive design, this floor covering is easier to install than a traditional covering. It can be used to cover an old surface in order to improve the visual appearance of the floor while providing extra protection against splashes, moisture and everyday wear.

Main advantages

• Self-adhesive floor covering ready to fit
• Waterproof surface suitable for damp environments
• Anti-slip effect for safer everyday use
• Practical roll format for covering a linear surface
• Quick renovation solution without completely removing the existing floor
• Bright pearly white colour, easy to match

Suitable uses and rooms

This self-adhesive floor covering is designed for domestic areas where protection against moisture and easy maintenance are required. It can be used to renovate a bathroom floor, modernise a WC floor, protect a walkway area or visually refresh a utility space. Its 5-metre roll format allows a surface to be covered continuously with fewer joins.

It is intended for individuals wishing to improve the appearance of an old, dull or slightly marked floor while keeping installation simple. This type of decorative film may also be suitable for rental projects, temporary refreshes or light renovation.

Product features

• Product type: floor sticker, self-adhesive floor film, renovation covering
• Main function: protection and renovation of indoor flooring
• Self-adhesive installation for simplified fitting
• Water and moisture resistance for use in wet rooms
• Texture designed for better grip underfoot
• Pearly white grid design for a discreet and neat finish
• Easy routine maintenance with a soft cloth or a slightly damp mop

Technical specifications

• Product name: waterproof self-adhesive floor covering
• Type: self-adhesive film for indoor floors
• Pattern: grid
• Colour: pearly white
• Roll dimensions: 60 cm x 5 m
• Stated thickness: approximately 0,35 cm
• Net weight: approximately 0,7 kg
• Parcel or roll length: 500 cm
• Width: 60 cm
• Recommended use: bathroom, toilet, indoor damp areas, light renovation
• Installation: direct adhesive application on a flat, clean and dry surface

Installation and use advice

To achieve a good result, it is advisable to carefully prepare the surface before installation. The floor must be clean, dry, smooth and free from dust, oil or residue. A well-prepared surface improves the adhesion and durability of the covering. Before installation, measure the area to be covered, then cut the film with a slight margin if necessary.

• Clean and dry the floor completely
• Cut the covering to the required dimensions
• Gradually remove the protective film
• Apply from the centre towards the edges to limit air bubbles
• Smooth down with a dry cloth or a flexible squeegee
• Avoid installing on an uneven, crumbly or heavily textured floor

In damp rooms, it is recommended to check the condition of the edges and joins regularly, especially in areas frequently exposed to water. To extend the product’s lifespan, avoid overly abrasive cleaning products and intensive mechanical rubbing.

Package contents

• 1 roll of self-adhesive floor covering
• Dimensions: 60 cm x 5 m
• Finish: pearly white grid

This self-adhesive floor covering for bathroom and WC is a simple solution for renovating an indoor surface with a clean and functional finish. Its practical format, moisture resistance and installation without complex work make it a suitable choice for common domestic renovation needs.