SIKA Sikagard Waterproofing Protection Floor SATINE - 5L

SIKA Sikagard Waterproofing Protection Floor SATINE - 5L

View description
23 ratings
£72.57
100% secure payment by debit or credit card
Receive your order between Thursday and Monday
Delivery from £6.70
Delivery to British Isles (shipping may be restricted to mainland UK)
Sold by DIY Zone

Description

Overview :
Presentation: SIKA Sikagard Waterproofing Protection Sol SATINE - 5L, colorless and ready to use, this product protects the soil from water, oil and diesel and improves the resistance to freeze and thaw cycles. This treatment facilitates the cleaning of the support and promotes its maintenance. The final appearance of the support is satin. Advantages: Protects from water, oil, diesel Reduces staining and contamination by hydrocarbons Resists deicing salts Improves the resistance to freeze-thaw cycles Revives the support by giving it a satin appearance Facilitates cleaning supports and promotes its maintenance Reduces efflorescence Easy application Used outdoors Sanding binder: Limits weed growth in paved sand joints / Breathes and Brackets breathability / Improves resistance to sand erosion of seals Read the package leaflet carefully before using the product Characteristics: Density: about 1 pH value: about 9 Consumption: Seamless supports: From 0.2 to 0.3 l / m² for the 1st layer - From 0.10 to 0.15 l / m² for the 2nd layer / Pavers with sand joints: 0.5 to 1.5 l / m2 for the 1st layer - 0.1 to 0.2 l / m² for the 2nd layer Application: + 5 ° C min. / + 30 ° C max Capacity: 5L Colors: White, colorless and satin after drying Reference: 460505 Packaging: Comes in the original packaging Advice: SUPPORT The mortars must be sufficiently hard and absorbent to penetrate the product. Ensure that the substrate to be treated is sufficiently porous to allow penetration of Sikagard Protection Sol SATIN. If they are quickly absorbed (less than 10 s): the support is sufficiently porous, it can be waterproofed normally. If they are slowly absorbed (from 1 to 10 min): the support is not very porous, the support can be waterproofed in a thin layer. If the water is not absorbed, the support is too "closed" and can not be waterproofed. APPLICATION To protect surfaces (interlocking pavers, slabs, stones ...): Apply Sikagard Protection Sol SATIN uniformly on the surface to be treated with a long-haired roller. If a 2nd coat is required for improved stain protection (oil, food, etc.), it must be applied before the 1st is dry to the touch. The 2nd layer should also be applied using a long-haired roller. To stabilize joints and protect surfaces: Apply Sikagard Protection Sol SATIN uniformly to the surface to be treated with a watering can equipped with its apple. Sikagard Protection Sol SATINE can also be applied using a low pressure sprayer (garden sprayer for example). Allow the product to penetrate the joints for a few minutes before removing the excess with a squeegee. When the application is made on uneven pavers and / or rough appearance, remove any surplus of product that could remain on the surface of the pavers (with the help for example of a squeegee or a wet cloth). If a 2nd coat is needed for improved protection against stains (oil, food, etc.), it must be applied before the 1st is dry to the touch. Use for the second layer a long-haired roller to promote the penetration of the product in the support. In all cases, protect the treated surface from rain for at least 6 hours (at + 20 ° C) after application. Protect longer at lower temperatures or in high humidity. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.
Product specification :
Density: about 1. pH value: about 9. Consumption: Seamless supports: From 0.2 to 0.3 l / m² for the 1st layer - From 0.10 to 0.15 l / m² for the 2nd layer / Pavers with sand joints: 0.5 to 1.5 l / m2 for the 1st layer - 0.1 to 0.2 l / m² for the 2nd layer Application temperature: + 5 ° C min . / + 30 ° C max .
Color: White, colorless and satin after drying.
Capacity: 5L
Reference: 460505

Features

  • ManoMano Reference
    ME4583477
  • SKU
    460505
DIY reviews by customers
About reviews
All reviews

About The Brand

SIKA
Founded in Switzerland by visionary inventor Kaspar Winkler over 100 years ago, Sika has developed into a successful global company with a leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing and protecting in the building sector and the motor vehicle industry. The future success of Sika is not only dependent on pursuing the right strategy, but is just as much based on the trust and dedication of all employees. The Sika journey to global leadership is founded on the company's entrepreneurial philosophy and the Sika Spirit.