Wear-resistant high-temperature thermostat, single-chip anti-interference electrical computer for indoor industrial home factory.

Features:

1. Large LCD screen configuration, clear and precise data display, easy to observe
2. The casing is made of high-quality, flame-retardant PC + ABS material, durable, wear-resistant, and high-temperature resistant.
3. High-reliability single-chip computer, strong anti-interference, safe and reliable
4. It is easy to operate by touching the keys and setting different working modes via the keys
5. Terminal wiring, relay output, and timing switch can be selected.

Specifications:

Features:
Large LCD screen configuration, clear and precise data display, easy to observe.
The housing is made of high-quality, flame-retardant PC + ABS material, durable, wear-resistant, and high-temperature resistant.
High-reliability single-chip computer, strong anti-interference, safe and reliable.
Easy to operate by touching the keys and setting different operating modes.
Terminal wiring, relay output, and timing switch can be selected.
It has temperature calibration and antifreeze functions.
The indoor temperature controller adopts microcomputer control technology to control the start and stop of the heating equipment via relays based on the results of comparing the indoor temperature and to adjust the temperature, so that achieve the goal of constant indoor temperature and energy saving.
Specifications:
Condition: 100% Brand New
Material: Tempered Glass, PC+ABS
Operating Voltage: AC200~240V, 50/60Hz
Load Current: 3A (Water Heating), 16A (Electric Heating)
Temperature Control Accuracy: ±0.5°C
Set Temperature Range: 5°C - 35°C
Temperature Limit Range: 5-99°C
Self-Consumption Power: Temperature Sensor: NTC
Weight: Approx. 230g / 8.1oz
Size: Approx. 8.5 x 8.5 x 4 cm / 3.3 x 3.3 x 1.6 inches
How to Use:
1. Open the main control panel. Using a 3.5 mm flathead screwdriver, pry along the angled surface to a depth of 4 mm. Gently pry open the card's retaining clip.
2. Connect the back panel and power supply. Wire according to the wiring diagram. Secure the back panel to the cassette with the M4 screw.
3. Connect the winding mechanism of the back panel and the top panel.
4. Reattach the two clips at a 30° angle. Press the two bottom corners together and attach them to the top casing. Installation complete.
Package List: 1 x Thermostat, 1 x Instruction Manual, 2 x Screws
Note: 1. Please allow 0-1 inch error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same way; the color of the item shown in the photos may be slightly different from the actual object. Please consider the real object as the standard. 3. Hysteresis (Return Temperature) Description: The default value of the external sensor limit temperature (OSV) is set to 42°C, and the external sensor limit temperature hysteresis (dIF) is set to 2. When the temperature reaches 44°C, the relay output stops. When the temperature drops to 40°C, the relay output restarts and heating begins. (Operates when the ambient temperature is lower than the set temperature.) 4. Please select the correct operating mode for the internal and external sensors.If the selection is incorrect or the sensor is faulty, the LCD interface will display "Err," and the temperature controller will stop heating until the fault is resolved.
Special Tip: Please choose the correct cable size when installing: for water heating, select 1.5-2.5 mm² solid core cable; for electric heating, select cable larger than 2.5 mm² solid core cable.