Welding Helmet, Welding Mask Automatic Welder Protection for Most TIG MIG MAG Modes Pirate Red 22.5 x 18 x 28cm

Description:

The liquid crystal light modulator of this product can switch from light to dark at the time of the appearance of the electric arc, according to the photoelectric principle. The degree of darkness can be adjusted between DIN 9 and 13. The UV-IR filter assembly consists of reflective coated glass, a multi-layer light modulator and a polarizer. It can effectively block ultraviolet radiation and infrared ray and effectively protect workers' eyes from damage caused by ultraviolet radiation and infrared ray.

Features:

• Auto-darkening helmet has wider coverage than common helmet. It can be used to protect the face and neck from damage caused by electric arc and improve work efficiency.
• This product is widely used in shipbuilding, petroleum, architecture, steel, boiler manufacturing, etc.
• The operating temperature range is -5℃~+55℃. The ultimate operating temperature range is -10℃~+60℃. The ultimate storage temperature range is -20℃~+70℃. The relative humidity range is 20% to 80%.
• The helmet can convert the electric arc resulting from welding into electronic signals.These signals will be amplified and transmitted to the circuit driven by the LCD screen, in which the light modulator will change from light to dark.
• It can effectively block ultraviolet radiation and infrared ray and effectively protect workers' eyes from damage caused by ultraviolet radiation and infrared ray.

Features:

• Material: PP
• Light condition: DIN 4
• Shading: DIN9-13 (adjustable)
• Item size: 22.5 x 18 x 28 cm / 8.85 x 7.08 x 11.02"
• Viewing window: 9.2 x 4.2 cm / 3.62 x 1.65"
• Delay time: <1/30,000 second (typical temperature)
• Sensitivity: low/high (adjustable)
• UV protection: 16
• Operating temperature: -5℃ to 55℃
• Storage temperature: -20℃ 70 ℃

Instruction:

• (1) Open the packaging and take out the headset. Remove the protective film on the viewing area. Check whether each part is intact (the lithium battery is installed before delivery).
• (2) Adjust the tightness of the comfort pad via the manual button to make the user comfortable after wearing it. It adopts self-locking function design. Press the button on the headband for an elastic fit. PICTURE : 2
• (3) Adjust the knobs on the sides of the helmet to change the tightness when raising and lowering the helmet. The visual angle can be moved forward or backward according to your needs. IMAGE: 3.4
• (4) Adjustable sensitivity and delay time of viewing area according to different working conditions. Reduce sensitivity to avoid interference. When a low current weak arc is used, high sensitivity can be selected. But high sensitivity must be adopted in case of argon arc. The delay time is when the filter changes from dark to light.
• IMAGE: 5.6
• (5) Depending on the degree of arc resistance, we can adjust the knobs as needed for different shading. IMAGE 1

The package includes:

1 x welding helmet

Note:

Do not allow water to enter the product, otherwise it will cause permanent damage.

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.