Well water pump, mini portable electric borehole pump, mini high flow borehole suction pump for small garden fountain.

【High-Quality Pump】Our hand drill pump is made of high-quality plastic and stainless steel. Its finely machined plastic housing ensures durability and longevity, without the risk of liquid contamination. 【Easy to Use】The pump comes with a mounting bracket. Drill holes in wood using a power drill, then tighten the bracket to secure the pump and keep your hands free. Operating without a power supply, this self-priming pump is compatible with both corded and cordless drills. It fits most electric drills. 【Convenient Use and Storage】Easily install the pump using a power drill. Installation is quick and simple. Compact and lightweight, convenient and easy to carry and store, this pump is ideal for home, garden, and outdoor activities. Note: The pump's flow rate and drilling performance are proportional. 【Large Capacity】Self-priming water pump with stable performance and high efficiency. The recommended speed for our borehole pump is 1500 to 3500 RPM. The delivery head and flow rate depend on the speed: the higher the speed, the greater the delivery head and flow rate. At 1500 RPM, the delivery head is approximately 1.5 meters and the flow rate is approximately 15 liters per minute. At 3000 RPM, the delivery head is approximately 3 meters and the flow rate is approximately 30 liters per minute. 【Wide Applications】Compatible with most portable drills. Simply connect the garden hose to the hose clamp and insert the drill to use the pump for water transfer. The borehole pump is suitable for transporting light liquids such as water, oil, diesel, liquid fertilizers, etc.

Only the above package contents are included; other products are not included. Note: Light reflection and different screen settings may slightly alter the color of the item. The permissible measurement error is +/- 1 to 3 cm. Practical and economical: This compact water pump with a plastic housing is ideal for pumping liquids quickly and easily. Perfect for emptying waterbeds or rainwater harvesting tanks. 1. For optimal starting and extended service life, add a small amount of lubricating oil to the pump inlet before use and rinse with water after each use. 2. After starting the pump, check that the liquid in the oil inlet tube is drawn into the pump within 15 to 20 seconds. If not, check that the oil inlet tube is correctly installed on the pump. 3. For safe operation, surface mounting of the pump is recommended. Suitable for water pipes with a diameter of 1.5 cm. 4. Ensure the hose is airtight and as short as possible. Its length should not exceed 2.75 m.