1/5
Wheel nut and screw drill and die set, 12-piece wheel nut and screw drill and die set
Of which environmental contribution £0.10 including VAT.
Sold by YUSONG-UK
You may also like
![[NEVER USED] 6pcs Thread Taps, Tap Drill Bit, M3-M10 Metric Thread HSS Titanium Coated Tap and 1/4" Hex Shank Fluted Tapping Bits for Tapping Various Threads.](https://cdn.manomano.com/pim-media/images/medium/fddd48d151bd0d29369bf0f23e7bdc6e02e351ed.jpg)
Compare with similar items
Product information
Description
For re-tapping wheel nuts and bolts
Thanks to the special holder, it can be used directly on a wheel bolt on the vehicle
Tap M12 x 1.25 - M12 x 1.50 - M14 x 1.50
Die M12 x 1.25 - M12 x 1.50 - M14 x 1.50
2 tap holders with square drive
2 die holders
30 mm1 Allen key
1 thread gauge with 12 cutting edges for the following pitches: 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.5 - 1.75 - NPT27 - BSP28
Features
- BrandOTHERS
- Pcs per pack1
- MaterialMetal
- Number of bit(s)12
- Weight900 g
- Type of tools includedThread dies
- ManoMano ReferenceME218178246
- MMID905745784207
- Product codeYS-KJ26-2443
- EAN8343923058676
Advice from
Taps and dies buying guide
Taps and dies are essential to make or re-thread a screw, a nut or any other mechanical element. The three-piece tap sets are the most commoly used and the tap wrench is as important as the die stock for a proper tapping. Drilling is required before tapping.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}