(White, 200 cm) Silicone Shower Barrier, Self-Adhesive Anti-Spill Shower Threshold Strip, Shower Barrier, Shower Threshold Barrier

[Warm Tips] 1. Once the shower screen is installed, it is recommended to apply silicone sealant evenly to the edge (this product does not contain silicone sealant) to make the shower screen more durable and waterproof. 2. Once the shower diverter is installed, it must be left for 30 hours. Do not allow water to flow and soak the moisture-retaining strip. Wait for the silicone sealant to cure before using it.

[Multifunctional] Our shower barrier can be installed on the floor or sink, the outer edge of the countertop, and the gap between the countertop and the wall to solve the problem of debris entering the gap (1-10 mm) and water leaks. It prevents drips, leaks, and the separation of wet and dry materials on countertops.

(The shower diverter is only 18 mm high, so it won't cause us to trip or cause problems on the counter, and it's easy to move.)

Applicable to multiple scenes. The folding shower partition is suitable for all smooth floors and countertops, such as kitchen counters, sinks, bathroom doors, bathroom corners, bathtub edges, sinks, window sills, balconies, around washing machines, washing machine bottoms, etc. The toilet creates a spill-proof barrier that effectively repels water, keeping floors and countertops clean and tidy. [High-Quality Silicone Material] The shower threshold is made of environmentally friendly, elastic silicone with a soft, smooth surface. The silicone material is waterproof and mold-resistant, easy to clean, difficult to discolor, stain, or deform, heat-resistant, and mold-resistant. It is also frost-resistant and suitable for all seasons. The shower threshold and mounting system are equipped with an adhesive backing that provides strong adhesion and won't easily fall off. Easy to Install: When installing the shower screen, the floor or countertop must be free of water and dust, otherwise the adhesive's bonding effect will be affected. You can use a knife to cut the required length, then tear off the adhesive tape and stick it on (when the shower screen needs to be bent, it is recommended to first cut it at 45 degrees, then cut it at 96 degrees for bending. It is more stable and durable).