White Door Bottom Caulk, 100x5cm Adhesive Door Bottom, Soft Silicone Thermal Sound Insulating Sealing Strip Anti Noise Dust Stops Cold Air

Easy Installation - Simply install it by tearing off the red film on the surface. Use thickened backing, strong adhesive, non-shedding, ensure this door gap blocker can be used in humid conditions, such as bathroom, laundry room, etc.Keep away noise and insects: Three-layer soundproof design, reduces annoying sounds up to five times and keeps dust and insects, cockroaches, spiders out for good.ATTENTION: 1. tear off the red film. 2. Clean the door to make sure it is free of dust and oil and keep it dry. 3.After installation, please press the item forcibly to make it firmer. 4. Be careful: The glue part of this item cannot touch water or oil, otherwise will lose strong adhesion.Size: 100x5cm，It can cover most door or wall cracksDescription：1.Clean/remove surface grease from the upstream door. 2. Cut to the correct length. 3. Remove the red protective strip, taking care not to remove the glue at the same time. 4. Install the door seal on the door. In less than five minutes of installation, you can enjoy a comfortable room for a long time.Material: TPE