White Flexible 100W Solar Panel kit 1

Secure Payment
£15 off on your 1st purchaseProfessionals, get Pro prices excl. VAT
Good to know
  • Warranty 1 year
  • Return within 14 days
Product details
  • Weight
    0.15 kg
  • Power
    100 W
  • Warranty
    1 year
  • Type of electrical installation
  • Type of power connector
  • NF certification
  • ManoMano Reference
  • MMID
  • Product code

Flexible 100W Solar Panel Kit 1

100w Flexible Lowenergie Solar Panel Charging Kit, Black with White edge.
Our flexible solar panels now include the far superior ETFE outer layer. This is essential for the long life of your flexible solar panel. The smooth shiny finish flexi panels are PET finish which can break down and peel off due to UV solar damage, often in less than 2 years’. ETFE is a little more expensive during production but worth it in the long run. It also has the benefit of slip resistance for marine applications.

Suitable for marine usage, also includes water-tight MC4 connectors. Also for Boats, Caravans, Motor-homes, electric fencing, road/ path/ driveway illuminated signage, campsites, yurts, multi-panel off grid power source for small buildings, remote telecoms, mobile food outlets, and many more...

1 year warranty on all our Flexible solar panels

Solar Kit Contents - 

100 Watt Flexible Solar Panel with 1M cable & MC4 plugs attached - 1200 x 540 x 3mm

5 Metre Solar Power Extension Cable with MC4 Connectors

10A PWM Solar Charge Controller including USB output

In the event that the solar panel is in shade for a prolonged period, our solar panels have two built-in bypass diodes which will enable the panel to continue generating.

Solar Panel Battery Charge Regulator Controller 12V / 24V Auto Switching

Solar charge controllers are required to regulate the power output from the solar panels to ensure effective charge of a typical 12V or 24V lead acid battery without overload. PWM (Pulse Wave Modulation) solar charge controller provides a cost-effective solar charger for the solar panel outputs in our range. Optimised charge control which helps to prolong the life of the battery. 3-6% more effective than non-PWM charge controllers. LED indicator light to show battery state. Uses industrial grade micro-controller chip to work in a wide range of temperatures and humidity.

Warning: The Connection Order Below must be followed

1, Battery Cable, 2 Load Cable, 3, Solar Panel Cable

Do not install the charge controller in a sealed enclosure where battery gases can accumulate.

These charge controllers can be used with one or more 12V batteries where additional storage capacity may be needed.

Technical Parameters - 

10A max Rated Discharge Current and Rated Charge Current.

Suitable for 12V or 24V systems, auto detecting & auto switching

Only suitable for lead acid batteries: Sealed wet lead acid, AGM, GEL.

This controller is not suitable for nickel metal hydride, lithium ion or other batteries.

Maximum solar input; <50V

Equalisation; Sealed 14.4V, Gel 14.2V

Float Charge; 13.7V (by default, value adjustable)

Load outlet discharge stop 10.7V (by default, value adjustable)

* Discharge Reconnect 12.6V (by default, value adjustable)

USB outlet - 5V/3A maximum.

Working temperature range -35 to +60 Deg C

Dimensions - 150 x 78 x 35 mm

Weight - 150 grams

* Discharge reconnect meaning. This voltage is user-adjustable. As the load consumes the power within the battery, the voltage eventually drops to 10.7V and the load output of the controller will automatically stop any further charge from protect the battery. If for example the next day maybe a rainy or cloudy day and the battery charges slowly, if the voltage is still below 12.6V, the load output from the controller will still not work. If the sun comes out in the afternoon, or the next day is much sunnier conditions, once the battery voltage rises above 12.6V, the controller load output will automatically start to work again. Discharge reconnect is set to 12.6V by default, although you may wish to set this perhaps 12.4V. Discharge reconnect is aimed at protecting the battery and reducing the depth of discharge cycling. Lead acid batteries last longer with shallow discharge.

Installation - 

1. Make sure your battery has enough voltage for the controller to recognise the battery type before first installation.

2. The battery cable should be as short as possible to minimise loss.

Advice from

How to install solar panels

Solar panel roof installation varies based on the accessories used. PV panels on a tile or slate roof can be installed over roofing underlay or a special integrated framework and solar flashing can be made of various materials including zinc, lead or plastic. Read on for the basic steps to installing solar panels.
How to install solar panels
You are here:
  • Millions of products

  • Delivery to your home or click & collect

  • Hundreds of dedicated experts online