Wireless carbon monoxide detector (CO detector) with audible alarm and LED indicator – standalone model, battery included, complies with NF EN 50291

Product Description:

The main cause of carbon monoxide poisoning in everyday life is a lack of caution when handling fire, heating, and in the bathroom. In most cases of carbon monoxide poisoning, people use barbecues, coal stoves, or a generator during a power outage. To prevent carbon monoxide poisoning, you can install carbon monoxide detectors in areas where carbon monoxide can be produced, such as kitchens and bathrooms, to detect leaks early. It is advisable to install these detectors even if there is no actual source of carbon monoxide in the house. Carbon monoxide detectors are standalone, battery-operated devices with built-in CO sensors that protect you and your family from the dangers of carbon monoxide. If you use a gas stove, oven, or fireplace, a carbon monoxide detector is a practical system that detects carbon monoxide even in low concentrations and protects you from poisoning with an audible and visual alarm (flashing red LED).

Important Note:

This product is designed exclusively for carbon monoxide detection, not carbon dioxide detection.

Product Features:

Powerful 85 dB alarm (85 dB / 3 m)

Test/Reset Button

Electronic Sensor

Maximum Value Memory

LCD Display of CO Concentration (ppm)

LED Indicator (Red = Alarm, Green = Operation)

Low Battery Warning, Operates on three 1.5V AA batteries.

Acoustic mode with four short warning tones.

In alarm mode, the red indicator flashes.

Ideal mounting location:

Wall or ceiling mounting.

Minimum distance of 3 m from the fire source.

Do not install in a ventilated area (fan or air conditioner).

The mounting location must have free access to ambient air.

(e.g., not behind curtains).

Technical Data:

Power Supply: 3 AA batteries, 1.5 V

Sensitivity and Duration: 50 ppm, alarm after 60-90 minutes

100 ppm, alarm after 10-40 minutes

300 ppm, alarm after 3 minutes

Standby Current: <50 µA (without LCD screen); <200 µA (with LCD screen)

Alarm current: <75 mA

Operating environment: 5–40 °C, 20–90% relative humidity.

Note:

If the CO detector does not display anything on the LCD screen after inserting the batteries, if no audible alarm sounds when the button is pressed, or if the LED does not flash, try adjusting the battery contact spring according to the following instructions.

Package contents:

1 x Carbon monoxide detector (batteries not included)