Wireless indoor and outdoor thermometer, 2-in-1 clock, LCD thermometer ℃/℉, digital indoor/outdoor thermometer, clock, temperature measurement with transmitter

【100m Long-Distance Transmission】: Indoor Thermometer. With the portable transmitter, you can measure the outdoor temperature from the sensor and transmit it within a 100m radius without obstacles.

【12/24 Hour, ℃/℉ Switchable】: Wireless indoor/outdoor thermometer, 12H/24H format, ℃/℉ temperature unit selectable. Can be placed on a table or hung on a wall.

【Wireless Technology】: The indoor and outdoor thermometers use wireless technology, allowing you to determine the outdoor temperature on the indoor receiver.

【Indoor/Outdoor Temperature Comparison】: Records the maximum indoor and outdoor temperatures and displays the indoor/outdoor temperature simultaneously. [Back Stand Design]: Indoor thermometer can be connected externally.

Can be placed on a table or hung on the wall.

Function:

Clock function, indoor temperature, outdoor temperature, storage of minimum/maximum temperature values.

Size: Main unit: 150 x 86 x 20, Sub-unit: 130 x 40 x 21

Temperature function:

Indoor temperature detection range: 0 °C to 50 °C (32 °F). up to 122°F)

Outdoor temperature detection range: -30°C–70°C (-4°F–158°F)

Indoor temperature detection cycle: half a minute

Outdoor temperature detection synchronization cycle: 1 minute

Resolution: 1°C/1°F

Time setting mode:

In standard mode, press and hold the "SET/°C/°F" button to enter time setting mode.

The set item flashes at a frequency of 1 Hz

The setting sequence is: 12/24 → Hour → Minute → Offset → Exit

Set the result and press the " Press SET/℃/℉ to confirm.

Ø Press "+/MAX/MIN". Pressing the button once will increase the set value by one step. Holding the button down for more than 2 seconds will increase the set value at a rate of 8 steps per second.

Ø If the button is not pressed within 2 seconds, after approximately 30 seconds, the setting mode will automatically exit and the set value will be saved.

Package includes: 1 master unit, 1 slave unit (Note: battery not included).