Wireless light switch, 86 RF safety switch for wall panel, easy installation without wiring

【Great Design】 RF 433 MHz wireless light switch. No wiring required between lights and switch. Stable and reliable performance with high reception sensitivity (>-97 dBm). Radio frequency signal transmission. A strong signal can penetrate walls, floors, doors, panels, etc. It can be controlled within a distance of 50 meters in an open space.

【Easy to Use】 The wireless switch can be mounted with double-sided tape or screws. You can turn the device on and off from anywhere using the wireless switch. It is a standard Type 86 switch.

【Easy to Install】 The mini size of the receiver is 47 x 42 x 23 mm. It is installed between the power supply and the device. It can be easily hidden in most electrical boxes or junction boxes, or it can also be mounted on the circuit board with screws. You can easily install it to control lights or outlets. No wiring required.

【Multiplayer Control】Each receiver can store about 10 wireless switches. This allows you to share the switches with your family. You can remotely control all the devices corresponding to the receiver. And one transmitter can also control multiple receivers. For example, one switch is installed on the wall next to the bedroom door and another is placed on the bedside table.

【Quality Assurance】High-quality relay can be used more than 400,000 times. This receiver has a 10-amp relay that can charge high-power electrical devices. The receiver is suitable for an AC voltage of 85V~250V, so AC 110V/220V/230V is fine.

【High-Quality Switch】The wireless switch can be operated more than 500,000 times. It requires a 12V 27A battery and can operate for about 5 years. The battery can be replaced after disassembly.

【More Flexibility】Extremely easy to configure and reset. You can easily add more wireless switches yourself as needed.