Wireless light switch and receiver set – easy installation and range up to 30 meters, ideal for LED indoor lights

• Wireless
• Easy Installation
• Programmable and Expandable
• No Wi-Fi or App Required

• High-Quality and Durable Construction
• No Wi-Fi/App Required
• Stable, Interference-Free Operation
• No Cable Pulling/No Tearing Up Walls
• Saves Time/Labor/Money
• Without Interfering with the Existing Wiring System
• Ideal for LEDs/Lamps/Bulbs/Fans/More
• IP66 Waterproof Switch Panel, Suitable for Indoor and Outdoor Installation

Common Uses for Wireless Switches

• Replace the pull switch for a light/fan
• Add a wireless switch to an existing wall switch
• Relocate the light switch in the stairwell/garage/basement
• Plan the wiring for the new house
• Continued......

Installation Steps:

1) Disconnect the power supply.

2) Locate the point where the circuit needs to be broken and closed; this is usually a junction box/junction box/canopy/ceiling.

3) Connect two wires from the power supply to the input wires of the receiver. Similarly,

connect two wires from the electrical device to the output wires of the receiver. You can use the included connector or cable ties (not included). 4) Check the connections and turn on the device. 5) Press the small diamond-shaped button on the receiver until it flashes. 6) Flip the switch; the devices will pair. Done. More combinations than those listed below are also available. An additional switch panel and another receiver are available in our shop. Unlike a conventional switch, this one requires no wired connection between the wireless switch and the receiver. The strong 433 MHz radio signal penetrates walls and doors. You can use the switch in any room to remotely control the paired lights.

Note:

The wireless range may be limited by electronic devices, walls, or other physical obstacles.

The switch panel is waterproof (IP66) and therefore works perfectly even in damp environments such as bathrooms and outdoors.

The switch is powered by a CR2032 button cell battery, which lasts 6 to 8 years.

Unlike conventional switches that are directly connected to the cable, there is no risk of electric shock or children touching the switch.

The switch panel can be mounted anywhere as a wall switch or used as a portable switch.

It is therefore ideal for the elderly, pregnant women, and people with limited mobility or back problems. For more comfort and security in your life. Receiver parameters: Material: Flame-retardant PC Input voltage: 180–275 V Built-in maximum load: 1000 W Transmitting frequency: 433 MHz Size: 39 mm x 23 mm x 22 mm (1.5" x 0.9" x 0.8") Switch parameters: Switch type: Push button switch Transmission range: 100 m (328 ft) indoors, 500 m (1640 ft) outdoors Size: 86 mm x 86 mm x 11 mm (3.4" x 3.4" x 0.4") Installation type: Self-adhesive/Screw-on/Portable Power supply: CR2032 battery (lasts 6–8 years) Instruments and measuring instruments Anti-theft alarm for added security Wireless anti-theft alarm Wireless RGB Wireless Gaming Mouse Wi-Fi Alarm System for Home Bicycle Lock with Alarm Enjoy a smart and comfortable life! The advantages of the wireless light switch Programmable and expandable Range: 100 m (indoors) & 500 m (outdoors) IP66 waterproof Versatile applications