Wireless light switch, RF 86 safety switch for wall panels, easy installation without wiring.

Product Information

【Excellent Design】 Wireless light switch with 433 MHz. No wiring required between lights and switch. Stable and reliable performance with high reception sensitivity (>-97 dBm). Wireless signal transmission. The strong signal penetrates walls, floors, doors, panels, etc. Control is possible in an open space up to 50 meters away. 【Easy Operation】The wireless switch can be mounted with double-sided adhesive tape or screws. You can turn your device on and off from anywhere using the wireless switch. It is a standard 86-pin switch. 【Easy Installation】The mini receiver measures 47 x 42 x 23 mm. It is installed between the power supply and the device. It can be discreetly placed in most electrical boxes or junction boxes, or screwed onto a circuit board. You can easily install it to control lamps or outlets. No wiring is required. 【Multiple Control Options】Each receiver can store up to 10 wireless switches. This allows you to share the switches with your family. Everyone can remotely control the device assigned to their receiver. A single transmitter can also control multiple receivers. For example, one switch on the wall next to the bedroom door and another on the nightstand. 【Quality Assurance】High-quality relay with over 400,000 switching cycles. This receiver uses a 10A relay and can charge high-power electrical devices. It is compatible with AC voltages from 85V to 250V, thus supporting 110V, 220V, and 230V. 【High-Quality Switch】The wireless switch is rated for over 500,000 clicks. It requires a 12V (27Ah) battery and has a lifespan of approximately 5 years. The battery can be replaced after disassembly. 【Maximum Flexibility】Easy setup and reset. You can easily add more wireless switches as needed.

Features

• Length10 cm
• Width10 cm
• height10 cm
• Weight0.1 kg
• ColorMulticolor
• Show all