Wireless light switch, RF transmitter safety switch and 10A receiver controller, easy installation for lamps up to 1500W / 1 receiver and 2 switches

【Superb Design】 433MHz RF Wireless Light Switch. No wiring is required between the lights and the switch. Stable and reliable performance with high receiving sensitivity (> - 97dBm). Radio frequency signal transmission. A strong signal can penetrate walls, floors, doors, panels, etc. It can be controlled from up to 50 meters away in an open space. 【Easy to Use】 The wireless switch can be fixed with blue-sided tape or screws. You can turn the device on/off from anywhere via the wireless switch. It is a standard 86-type switch. 【Easy to Install】 The mini receiver size is 47*42*23 mm. It is installed between the power supply and the device. It can be easily hidden in most electrical boxes or junction boxes, or it can also be screwed to the circuit board. You can easily install it to control lights or outlets. No wiring required. 【Multiplayer Control】 Each receiver can store approximately 10 wireless switches. This allows you to share switches with your family. Everyone can remotely control the device corresponding to their receiver. One transmitter can also control multiple receivers. For example, one switch installed on the wall next to the bedroom door and another placed on the bedside table. 【Quality Assurance】 High-quality relay with a lifespan of over 400,000 uses. This receiver uses a 10-amp relay, which can handle high-power electrical devices. The receiver is suitable for AC voltages of 85V~250V, so AC 110V/220V/230V is compatible. 【High-Quality Switch】 The wireless switch can withstand over 500,000 clicks. A 12V 27A battery is required. It can operate for approximately 5 years. The battery can be replaced after removal. 【More Flexibility】 Extremely easy to set up and reset. You can easily add additional wireless switches yourself as needed. Product Description

Strong 433 MHz RF Signal

The DieseRC radio control wireless switch, which uses 433 MHz radio frequency technology, has a strong signal that can penetrate walls, floors, and doors. The EV1527 learning code chip allows the system to be programmed and adjusted. You can control each device connected to the relay receiver via the wireless switch from anywhere within a reliable range.

Easy to Use

There is no need for wiring between your lights --> traditional switch --> power supply. You can easily control the light connected to the controller via the wireless switch. No need to cut into the wall wiring. The wireless switch can be placed anywhere according to your needs. Wide application: These products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. Wireless remote control applications range from simple household remotes to automation systems such as lights, water pumps, water heaters, wireless security alarms, ventilation devices, fans, lamps, wireless door alarms, monitors, printers, fountains, and other electrical equipment, etc.

Product Parameters DieseRC Wireless Switch

Operating Voltage: AC 85V ~ 250V Maximum Current: 10A RF Frequency: 433MHz Encoding Support: 1527 Learning Code Receiving Sensitivity: >97dbm Operating Temperature: -30 ~ +80℃ Receiving Range: Approximately 20 meters indoors Standby Current: <5mA Relay Receiver Size: 47*42*23mm Wireless Switch Size: 86*86*13mm

How to Program

Press the button on the wireless switch, the light will turn on; press the button again, the light will turn off.

Programming

Press the learning button (on the receiver) twice. Wait 3 seconds; press a button on the wireless switch. Success. Reset

Press the learning button (on the receiver) 8 times. Success.

Note: After resetting, all wireless switches will no longer be able to control this receiver.