Wireless Light Switch, RF Transmitter Security Switch and 10A Receiver Controller, Easy Installation for Lamp up to 1500W(1 Receiver and 2 Switches)

【Super Design】 433Mhz RF wireless light switch. No wiring required between the lights and the switch. Stable and reliable performance with high receiving sensitivity (> - 97dBm). Radio frequency signal transmission. A strong signal can pass through walls, floors, doors, panels, etc. It can be controlled within 50 meters in an open space.

【Easy to Use】 The wireless switch can be fixed with double-sided tape or screws. You can turn the device on/off from anywhere via the wireless switch. It is a standard 86 type switch.

【Easy to Install】 The mini size of the receiver is 47*42*23 mm. It is installed between the power supply and the device. It can be easily hidden in most electrical boxes or junction boxes, or can also use screws to fix it on the board. You can easily install it to control lights or socket. No wiring required.

【Multiplayer Control】 Each receiver can store about 10 wireless switches. So you can share the switches with your family. You can all remotely control the device corresponding to the receiver. And one transmitter can also control multiple receivers. For example, 1 switch installed on the wall next to the bedroom door and another placed on the bedside table.

【Quality Assurance】 High-quality relay that can be used more than 400,000 times. This receiver adopts a 10 amp relay, which can load high-power electrical appliances. The receiver is suitable for AC 85V~250V voltage, so AC 110V/220V/230V is OK.

【High Quality Switch】 The wireless switch can be clicked more than 500,000 times. 12V 27A battery is required. And it can work for about 5 years. The battery can be replaced after disassembly.

【More Flexibility】 Extremely easy to set up and reset. You can easily add additional wireless switches yourself according to your needs.

【Note】 Our products can be connected to conventional 10A1500W bulbs and LED lamps can be connected to a maximum of 200W.