Wireless Light Switch, RF Transmitter Switch for Type 86 Wall Panel and 10A Relay Controller-Receiver, for Lights Up to 1500W
You may also like
Compare with similar items
Product information
Description
【Excellent Design】433 MHz RF wireless light switch. You can remotely turn a lamp or any other device connected to the receiver on or off using the remote control. Stable and reliable performance with strong reception sensitivity (> - 97 dBm). Radio frequency signal transmission. Strong signals can pass through walls, floors, doors, panels, etc. It can be controlled from a distance of less than 30~50 meters in an open area. 【Easy to Install】The receiver's mini size is 47*28*22 mm (1.85*1.1*0.87 inch). It is installed between the power source and the device. It can be easily concealed in most electrical or junction boxes, or mounted on a plate using screws. You can easily install it to control lights or outlets. No wiring is required. 【Easy to Use】The wireless switch can be mounted with double-sided tape or screws. You can turn the device on or off from anywhere using the wireless switch. It is a standard 86-type switch. 【Multi-Player Control】Each receiver can store approximately 10 wireless switches, allowing you to share them with your family. Everyone can remotely control the device connected to the receiver. For example, one switch can be installed on the wall next to the bedroom door, and another on the nightstand. One transmitter can also control multiple receivers (only in lock mode). 【Quality Guarantee】High-quality relay with a lifespan of over 400,000 uses. This receiver uses a 10-amp relay, capable of handling high-power electrical devices. The receiver is suitable for AC voltages from 110V to 250V, so 220V/230V/240V AC are acceptable. 【High-Quality Switch】The wireless switch can be operated more than 500,000 times. It requires a 12V 27A battery and can operate for approximately 5 years. The battery is replaceable after removal. 【More Flexibility】Very easy to set up and reset. You can easily add additional wireless switches as needed. 【Secure System】The chip code is the EV1527 learning code, which is the most popular technology for a more stable remote control system. 【Wide Application】The products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control all devices connected to the receiver via the wireless switch, such as lamps, lighting, ventilation devices, electric garbage collectors, DIY wireless power outlets, signal transmission, etc.
Features
- BrandSNQ
- Length1 cm
- Width1 cm
- Height1 cm
- Weight100 g



















