Wireless Night Light with Motion Sensor, 18 LED Rechargeable Battery Lamp Automatic Night Lamp for Cabinet, Closet, Carage, Hallway (2 Pack)

LIGHTING MODES: There is a three-grade switch on the side of the lamp: ON/OFF/AUTO. You have the choice between constant lighting in “ON” mode or automatic lighting with motion and light detection function in “AUTO” mode.

LONG LIFESPAN & RECHARGEABLE BATTERY: Built-in 1000mAh rechargeable lithium battery that can last 14 hours in “ON” mode and 3 months in “AUTO” mode. Rechargeable via mini USB, it will save you from having to run cables to power it, which saves money since you don't need to buy batteries all the time.

EASY TO INSTALL: You can attach them using screws or the magnetic strips provided. It comes with magnetic strips and 3M adhesive, which is ideal if you want to move them around for recharging.

WHITE LIGHTING: Built-in 18 super bright LEDs provide stable and soft enough glare-free lighting to illuminate any areas you need, make sure you never stumble in the dark.

WIDE APPLICATION: Use for garage, bedroom, storage room, basement, attic, wardrobe, hallway, closet, sink, countertop and anywhere you want or as an accent light.

Product description

Why do you need this motion sensor light?

You have such problems.

- You will feel annoyed because there is not enough light in some small areas and corners like cabinets, cupboards, cupboards and drawers.

- It is expensive and difficult to find an electrician who can be rewired for easy installation.

- You can't free your hands with a flashlight while you're trying to find something.

- Night lights need to constantly change the battery.

- You have to press the switch in the dark to turn it on. And don't forget to turn it off when you go...

Now our PIR induction lamp can solve the above-mentioned problems perfectly.

Why do you need this motion sensor lamp?

Do you have these problems?

• You feel very inconvenient because there is not enough light in some small spaces and corners such as cabinet, hall, closet and drawers.
• It is expensive and complicated to find an electrician for rewiring for light installation;
• You cannot free your hands with a flashlight while you try to find something;
• Some night lights need to change the battery in permanence;
• You have to fumble for the switch in the dark to turn it on. And have to turn it off when you leave….

Now our PIR induction lamp can perfectly solve the above problems.

Main features

Hands-free, automatic on and off in AUTO mode in the dark It has integrated a light and motion detection indicator that allows the night light to automatically turn on in the dark when you approach it within a range of 120° and 3 m. And the night light turns off after 15 seconds without movement so as not to waste the charge. Please note: the lamp will not turn on when motion is detected if the surrounding environment is bright enough.	2 operating modes: permanent lighting (ON), lighting by motion detection (AUTO) and off (OFF) -AUTO: Motion detection It lights up as soon as you approach when the ambient light is dark. It stays on for approximately 15 seconds then turns off and on again as soon as the slightest movement is detected. -On: always on without activated motion detection which allows it to be used as a portable lamp or emergency lighting. -Off: Stay off until you change mode.	High capacity rechargeable battery A significant savings gain: 1000 mah, charges via the micro USB cable provided, can be used for up to 14 hours in “ON” mode and 3 months more in “AUTO” mode after a single charge. Power available: Ability to use an external battery, wall adapter or any USB port such as your PC/laptop as a power source.

READ LESS

Packaging included

1 x motion sensor light

1 x Charging Cable (USB wall plug not included)

2 x metal strips

2 double-sided adhesive strips

1 x magnetic strip

1 x user manual

This night light is super easy to install. No wires, no tools were required.

They come with a magnet, metal strips and 3M adhesive pads.

Use the 3M adhesive pad to stick the metal strip to where you want, then stick the magnetic adhesive pad to the back of the lamp (additional 3M and metal strip provided).

It is not imposing and very light (45g), allowing it to be easily transported without being overloaded.

a small hook on the end which would allow it to be hung in a tent at the campsite, in the garage or in the cellar if necessary.

Specifications

• Brightness: 220LM
• Sensor type: dual motion and light sensor
• Detection range: 3m
• Motion angle: 120°
• Product dimension: 15 * 3 * 1.5cm
• Product weight: 45g

APPLICATION

Sufficient lamp for a cupboard or to use as a portable lamp thanks to the "magnetic" fixing system allowing the lamp to be easily removed from its fixing support:

a “walking” lamp at night to avoid waking everyone up.

A simple, practical and DIY-free solution to brighten the sink area located under the kitchen cupboards.

An accent lamp to brighten up cupboards, wardrobes, in a hallway or under the stairs!

....

And many more apps are waiting for you to explore.