Wireless Remote Control Duplicator, Gate Remote Control Copy, 433.92MHz Electric Cloning Universal Key Fob Duplicator for Garage Doors (2 items)
You may also like
Compare with similar items
Product information
Description
1. Chips can be copied:
2260 (all manufacturers); 2262 (all manufacturers); PT2264, 5326 (all manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers); 1527 (all manufacturers); 2240 (all manufacturers); HCS101, HCS200/HCS201 (part number)
2. Cleaning method:
Simultaneously press the unlock and lock buttons (on some cases, the up and down buttons are activated). After the LED indicator flashes three times, release one button while keeping the other pressed, then press the released button three times. The LED indicator will flash rapidly. All data in memory will then be erased; the LED indicator on the cleaned remote will no longer light up, regardless of which button is pressed. 3. Copying Method: Hold the original remote in one hand and the remote to be copied in the other. The two remotes should be placed as close as possible (ideally, place them side by side on the desk, at zero distance). Press the copy button. When the LED indicator flashes rapidly after three flashes, the copy is successful. The other operating methods are identical. Some remotes have lower transmission power; therefore, it is advisable to place the original remote on top of the remote to be copied. To avoid noise, it is important to avoid interference. If the copy fails, try again after erasing the code. (Note: Your original remote must be functional and operate on the same frequency as ours.)
4. Features of the New Copied Remote
The four buttons allow you to copy four different types of chips. Therefore, one remote can control four different types of equipment. Faster data copying speed, reduced code loss, and longer range.
Features
- BrandCOOCHEER
- Motorization useFor gate
- Motorisation accessory typeRemote-control
- Wireless communication protocolRF 433/868 MHz
- Motorization compatibilityYes
'/%3E%3C/svg%3E){kind=small}