Wireless remote control switch, projection screen controller for electric screens and curtains

1. Operating Voltage: 220 V AC ± 10%

2. Load Power: ≤ 500 W (Lower load less than 500 W, 220 V AC)

3. Operating Frequency: 315 MHz, 433 MHz (optional)

4. Operating Temperature: -25 °C to +75 °C

5. Remote Control Range: 100 meters (open field)

Operating Instructions

1. Pairing: Open the receiver panel, connect the power supply, and press and hold the learning button (setting button). The indicator light will flash. Release the learning button and press any button on the remote control. The indicator light will turn off, indicating successful pairing.

(Once pairing is complete, pressing the up or down buttons on the remote control will produce a relay click.) Otherwise, please repeat the pairing process.

2. Wiring: Please connect the power cord and all control wires according to the markings on the circuit board.

Functions of the remote control and control panel buttons:

△: Wind up; =: Stop, power off; ▽: Lower

Precautions:

1. The base plate is live; do not touch it while it is live.

2. If the motor does not operate after installation, try reversing the steering cables.