Wireless remote relay transmitter 4V 9V 12V outdoor indoor wireless remote control switch

Specifications: This is a wireless remote switch with a learning code (receiver). The transmitter (remote control) is easy to set up. It has a strong signal that can penetrate walls, floors, and doors, allowing you to control the receiver from anywhere within a reliable range. The volume and performance are stable and reliable, with high reception sensitivity. Applications include automatic doors, windows, lifting equipment, access control, and more. It's a perfect wireless relay remote control for mainframe computers.

Specifications Operating Voltage: DC4V 12V (DC4V 4.5V 5V 6V 7.4V 9V 12V) Standby Current: 7-9mA Working Current: 70-130mA Relay Standard: 20A (14VDC 12A 120VAC 7A) Maximum Load: 10A (better load is less than 7A) Learning Code: Learning button to add a transmitter Working Mode: Jumper-adjusted momentary switch Compatibility: For mainframe computers Size: Approx. 43 x 30 x 22 mm / 1.69 x 1.18 x 0.87 inches Distance Dimensions: Approx. 60 x 30 x 12 mm / 2.36 x 1.18 x 0.47 inches Quantity: 1 piece. Package weight: 50 g.

Package contents: 1 x remote control relay switch. 1 x transmitter (Other items in the picture are not included)

Short-term ---- Press and hold ---- ON, release ---- OFF. Toggle ---- Press once ---- ON. Press again ---- OFF GND----Input GND - VCC----Input VCC + NC---- Normally closed COM----General NO----Normally open

Clear code: Press and hold the receiver's learn button for approximately 5 seconds until the receiver's LED indicator changes from ON to OFF, indicating that the code has been cleared.

Learn code: a>Momentary/Toggle mode: Press the receiver's learn button; the receiver's LED indicator will flash continuously.