Wireless Remote Switch, AC 110V/220V/230V/240V RF Remote Control Switch, 433 MHz Wireless RF Module Receiver for Water Pumps, Security Industries

1. The receiver can store a maximum of 20 remote controls. If there are more than 20 remote controls, some may overflow and lose their functionality.

2. The receivers in our store are primarily used with our company's related products. If you wish to use your own transmitter, please verify that its operating frequency, chip type, and vibration resistance match ours. If they do not, they will not be compatible.

Reset the receiver: Press the receiver's learning button 8 times consecutively to erase the memorized remotes.

Note

: After resetting, not all remotes will work (they will need to be re-paired to be used).

To learn Momentary mode: Press the learning button (on the receiver) once, and the LED (on the receiver) will flash once.

When the LED is on, press the button on the remote (that you want to learn). The LED (on the receiver) will flash 3 times and then turn off; learning is successful.

To learn Toggle mode: Press the learning button (on the receiver) twice. The LED (on the receiver) will flash 2 times.

When the LED is on, press the button on the remote (that (If you want to learn), the LED (on the receiver) flashes 3 times then turns off; learning is successful. To learn the Leaching Mode: NOTE: When you select the locking mode, you must learn two different buttons; the first is "ON". and the second is "OFF".

For example: Press the learning button (on the receiver) 3 times, the LED (on the receiver) will flash 3 times.

When the LED is on, press button A on the remote control, the LED will flash 3 times.

Then press button B on the remote control, the LED will flash 3 times, the learning process is successful.

In the example above, A = on, B = off.

Important reminder: You must purchase your own 23A 12V battery; this package does not include batteries.

NOTE