Wireless Self-Generating Light Switch, Radio Frequency Control with Relay Receiver and Fuse, Battery-Free Kinetic Switch (1 Way Kit, 2 Buttons)

【Excellent Design】RF 433MHz self-generating wireless light switch. You can remotely turn on/off the light or other machine which connects to the relay receiver via the kinetic wireless switch. Stable and reliable performance with high reception sensitivity (> - 97dBm). Transmission of radio frequency signals. A strong signal can pass through walls, floors, doors etc. It can be controlled within 50 meters distance indoors.
【Easy to install】 The mini size of the receiver is 60*43*27mm. It is installed between the power supply and the device. It can be easily used screws to fix it on the board. You can easily install it to control lights or socket. No wiring requirements.
【Multiplayer Control】Each receiver can store about 5 wireless switches. So you can share the switches with the family.You can all remotely control the device that connects to the receiver.
【High Quality Switch】The self-generating wireless switch can be clicked more than 200,000 times. No battery demands. Safe and waterproof, can be installed directly in bathroom, kitchen, etc. Wet hands can also touch the wireless switch. Don't worry about electric shock and wet and rusty battery. Friendly and considerate operation mode for children and the elderly.
【Quality Assurance】High quality relay can be used more than 400,000 times. This receiver adopts 10A relay, which can charge high-power electrical appliances. The maximum load of the controller is 1000W.The receiver is suitable for AC 85V~250V voltage, so AC 110V/ 220V/ 230V is OK.
【Self-protection】 There is a 10A fuse in the receiver which can protect the receiver when overloaded. And the fuse can be replaced easily.
【Wide application】 The products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control each device connected to the receiver via the wireless switch. such as lamp, lighting, ventilation device, food waste crusher, DIY wireless socket, signal transmission, etc.
【More flexibility】 Extremely easy to program and reset. You can easily add additional wireless switches yourself according to your needs.【Excellent Design】RF 433MHz self-generating wireless light switch.You can remotely turn on/off the light or other machine which connects to the relay receiver via the kinetic wireless switch. Stable and reliable performance with high reception sensitivity (> - 97dBm). Transmission of radio frequency signals. A strong signal can pass through walls, floors, doors etc. It can be controlled within 50 meters distance indoors.【Easy to install】 The mini size of the receiver is 60*43*27mm. It is installed between the power supply and the device. It can be easily used screws to fix it on the board. You can easily install it to control lights or socket. No wiring demands.【Multiplayer Control】Each receiver can store about 5 wireless switches. So you can share the switches with the family.You can all remotely control the device that connects to the receiver.【High Quality Switch】The self-generating wireless switch can be clicked more than 200,000 times. No battery demands. Safe and waterproof, can be installed directly in bathroom, kitchen, etc. Wet hands can also touch the wireless switch. Don't worry about electric shock and wet and rusty battery. Friendly and considerate operation mode for children and the elderly.【Quality Assurance】High quality relay can be used more than 400,000 times. This receiver adopts 10A relay, which can charge high-power electrical appliances. The maximum load of the controller is 1000W. The receiver is suitable for AC 85V ~ 250V voltage, so AC 110V/ 220V/ 230V is OK.

• Programmable. The receiver can store 10 switches.
• Easy wiring.Convenient to use.
• WLAN intelligent control
• Easy to wire. Convenient to use.
• Programmable. Can store 20 remote transmitters.
• Passive output relay receiver.

• is a professional manufacturer of RF remote control switches and WIFI/Zigbee/Bluetooth smart switches, which focus on providing customers with convenient, energy-saving, safe, efficient and cost-effective remote control devices and solutions. We have our own factory, our own engineers and our own brand. Our products have been praised by general customers and widely used in different fields, such as lighting, lamp, bulb, water pump, ventilation system, alarm bell, electric door lock, etc.

  The wireless radio control switch, which uses 433 MHz frequency radio frequency technology, has a strong signal that can pass through walls, floors, doors. You can control each device connected to the relay receiver via the wireless switch from any location within a reliable distance. It is a kinetic wireless switch, no battery demand. Energy saving.

  There are no wiring requirements between your lights --> traditional switch --> power supply. You can easily control the light connected to the controller via the wireless switch. No need to chisel wall wiring. The wireless switch can be attached to any wall. There is a fuse inside the receiver which can anti-overload.

  These products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc.Wireless remote control applications range from simple home remote controls to automation such as lights, water pump, water heater, wireless security alarm, ventilation device, fan, lamp, wireless door alarm, monitor, printer, fountain and other electrical equipment etc.

  
  
  10 A
• RF frequency: 433 MHz
• Receiving sensitivity: >97dbm
• Operating temperature: -30 ~ +80 ℃
• Receiving range: about more than 50 meters indoors
• Standing current: <5 MA
• Relay receiver size: 60*43*27 mm
• Kinetic wireless switch size: 86 * 86 * 15 mm

Press the key of the kinetic wireless switch, the light will turn on; Press the key again, the light will turn off.

Programming

1. Press and hold the learn button (on the receiver) for 3-5 seconds.The LED indicator lights up;
2. Press any button on the kinetic wireless switch. succeed.

Press and hold the learning button (on the receiver) for about 8-10 seconds until the LED light flashes 3 times. succeed.

Notice:After reset, all wireless switches can no longer control this receiver.

How to program

Reset

A kinetic wireless switch can control a relay receiver (light), and a receiver can be controlled by a kinetic wireless switch of about 5 pieces. You can control a light from different locations by creating multi-way switches.

Wireless light switch

Smart module

1/2/4 CH relay remote control

More remote control

Wireless light switch

Smart module

Why we love our job？

Are our products high quality?

Can you buy our products with confidence?

About

Strong 433 MHz RF signal

Easy to use

Wide application

Product parameters

Kinetic wireless switch

How to program

Reset

Multi-directional control switch