Wireless self-generating lighting switch, radio frequency switch and relay receiver, controller with fuse, battery-free kinetic switch (1-way, 1-key kit)

【Excellent Design】 433 MHz RF self-generating wireless light switch. You can remotely turn lights or other devices connected to the relay receiver on/off via the kinetic wireless switch. Stable and reliable performance with high reception sensitivity (> - 97dBm). Radio frequency signal transmission. A strong signal can penetrate walls, floors, doors, etc. It can be controlled from a distance of 30-50 meters indoors. 【Easy to Install】 The mini receiver size is 60*43*27 mm. It installs between the power supply and the device. It can be easily mounted on the panel using screws. You can easily install it to control lights or outlets. No wiring is required. 【Multi-User Control】 Each receiver can store approximately 5 wireless switches. Thus, you can share switches with family members. You can all remotely control the device connected to the receiver. 【High-Quality Switch】 The self-powered wireless switch can withstand over 200,000 clicks. No battery required. Safe and waterproof, it can be installed directly in the bathroom, kitchen, etc. Even with wet hands, the wireless switch can be operated. No need to worry about electric shocks or a wet and rusty battery. User-friendly and safe for children and the elderly. 【Quality Assurance】 High-quality relay with a lifespan of over 400,000 uses. This receiver uses a 10A relay, which can handle high-power electrical devices. The controller's maximum load is 1000W. The receiver is suitable for AC voltages of 85V~250V, so AC 110V/220V/230V is compatible. 【Self-Protection】 There is a 10A fuse in the receiver that protects it from overload. The fuse is easily replaceable. Product Parameters Kinetic Wireless Switch Operating Voltage: AC 85V~250V Maximum Current: 10A RF Frequency: 433MHz Receiving Sensitivity: >97dBm Operating Temperature: -30~+80℃ Receiving Range: Approximately 50 meters indoors Quiescent Current: <5mA Relay Receiver Size: 60*43*27mm Kinetic Wireless Switch Size: 86*86*15mm How to Program Press the button on the kinetic wireless switch; the light will turn on. Press the button again; the light will turn off. Programming Press and hold the learning button (on the receiver) for 3-5 seconds. The LED indicator will light up. Press a button on the kinetic wireless switch. Success. 【Wide Application】 The products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control any device connected to the receiver via the wireless switch, such as lamps, lighting, ventilation devices, food waste disposal units, DIY wireless outlets, signal transmission, etc. 【More Flexibility】 Extremely easy to program and reset. You can easily add additional wireless switches yourself according to your needs.