Wireless transmitter/receiver, single key to operate DMX512 PCB modules, tri-color LED board displaying 5V DC for the received signal

Features: 1. Small size, easily fits inside accessible lighting fixtures. 2. One-touch operation, tri-color LED display. 3. Transmits standard DMX512 protocol data from the controller; can also transmit DMX512 lighting and DMX512 protocol data. 4. 126-channel automatic frequency hopping, high anti-interference capability to ensure reliable operation. 5. Adjustable 7-group identification code; the user can operate an individual wireless system of up to 7 groups without any interference from each other in the same location. Specifications: Description: - Small size, easily fits inside accessible lighting fixtures. - One-touch operation, tri-color LED display. - Transmits standard DMX512 protocol data from the controller; can also transmit lighting and DMX512 protocol data. - 126 channels automatically hop frequencies, high anti-interference capability to ensure reliable operation - 7 adjustable ID code groups, the user can use 7 individual wireless system groups without any interference with each other in the same location - Input voltage: 5V DC - Working frequency section: 2.4GHz ISM band, 126 channel frequency section - Maximum transmit power: 20dBm - Receiver sensitivity: -94dBm - Signal port: RS485 or AURT CPU serial port User manual: Correspondence correlation of ID code and LED color: 1: RED 2: GREEN 3: RED-GREEN = YELLOW 4: BLUE 5: RED-BLUE = PURPLE 6: GREEN-BLUE = CYAN 7: RED-GREEN-BLUE = WHITE Press the button once to indicate the ID setting, press again To set the IC, then press the ID value, adding 1 each time. Operating conditions: - LED continuously lit: no DMX or wireless signal. - Flashing red LED: transmission. - Flashing green LED: reception. - RF Frequency: 2400-2525 MHz, 126 channels total, automatic search. - ID Code: Group ID code "1-7", press the "key" button to set it. It can only operate with the same ID code for the transmitter and receiver. Establishing communication: - Turn on the DMX512 wireless receiving board and the transmitting board. - Press the "key" button to set the same ID value for the transmitting and receiving boards. Please use a different ID value if you need to use more than one wireless network group simultaneously in the same location. - The red LED flashes when the transmitter sends DMX data without an interfering frequency section, then the receiver changes the transmitted frequency section. The green LED flashes until the same identification value is corrected; the LED flashes more rapidly once the DMX data is faster.