Wireless wall switch for lighting – Up to 1500 W, 10 A relay receiver, easy installation, compatible with all types of light bulbs.
Product information
Description
- 【Exceptional Design】 Wireless switch with 433 MHz. No wiring required between light and switch. Stable and reliable performance with high receiver sensitivity (> -97 dBm). Wireless signal transmission. A strong signal penetrates walls, floors, doors, panels, etc. Control is possible outdoors up to a distance of 50 meters.
- 【Easy Operation】 The wireless switch can be mounted with double-sided adhesive tape or screws. You can remotely control the device via the wireless switch. It is a standard 86-pin switch. [Easy Installation] The mini receiver measures 47 x 42 x 23 mm. It is installed between the power supply and the device. It can be easily concealed in most junction boxes or mounting on the circuit board with screws. Installation is simple and allows you to control lights or outlets. No wiring is required. [Multi-user control] Each receiver can store up to 10 wireless switches, allowing you to share switches with your family. Each person can remotely control the device connected to their receiver. A single transmitter can also control multiple receivers, for example, a wall switch by the bedroom door and another on the nightstand. [Quality assurance] High-quality relay with a lifespan of over 400,000 switching cycles. The receiver uses a 10-amp relay and is suitable for use with high-power devices. It is compatible with AC voltages from 85V to 250V and therefore works with 110V, 220V, and 230V. [High-quality switch] The wireless switch is rated for over 500,000 switching cycles. It requires a 12V, 27Ah battery. The battery life is approximately 5 years. The battery can be replaced when removed. [Maximum flexibility] Extremely easy installation and reset. You can easily add additional wireless switches if needed.
Product Description
| | | |
|---|---|---|
Powerful 433 MHz Radio SignalThe DieseRC wireless switch utilizes 433 MHz radio technology and has a strong signal that penetrates walls, floors, and doors. The integrated EV1527 chip allows for system programming and customization. You can control any device connected to the relay receiver via the wireless switch from anywhere within range. Easy to use: No wiring is required between the lights, the conventional switch, and the power supply. The lights connected to the controller can be conveniently controlled via the wireless switch. There's no need to run cables in the wall. The wireless switch can be placed wherever you need it. | Wide range of applicationsThese products can be used in private homes, farms, factories, offices, laboratories, supermarkets, etc. Applications for wireless remote control range from simple household remotes to the automation of lighting, water pumps, water heaters, wireless alarm systems, ventilation systems, fans, lamps, wireless door alarms, monitors, printers, fountains, and other household appliances, etc. |
 | Product SpecificationsThis RC radio Switch
|
 |  |
ProgrammingPress the button on the wireless switch; the light turns on. Press the button again to turn the light off. Programming
| ResetPress the learn button (on the receiver) 8 times. Successful.
Note:After resetting, no wireless switch can control this receiver. |
Features
- BrandOTHERS
- Amperage10 A
- AutomaticNo
- With indicator lightNo
- Switch and socket combinationNo
'/%3E%3C/svg%3E){kind=small}