XH-W3005 Digital Humidity Controller – 0-99% RH Range – 0.1% Accuracy – 12V/24V/220V Power Supply – Direct Output

General Description: The XH-W3005 digital humidity controller is a high-quality, durable, and user-friendly device. It features a simple control panel with two buttons for intuitive operation. With a measurement accuracy of 0.1%, it offers a wide humidity measurement range from 0% to 99% RH, making it suitable for a variety of applications. This model also offers multi-voltage selection, allowing you to choose between 12V, 24V, and 220V as needed. Technical Specifications Model: XH-W3005 Weight: 68 g / 2.4 oz Input Voltage: 12 V, 24 V, 220 V (optional) Humidity Range: 0% ~ 99% RH Humidity Control Accuracy: 0.1% RH Load Power: 120 W / 240 W / 1500 W Output Type: Direct Output Mounting Hole Spacing: 73 mm / 2.9 in Size: 60 x 45 x 31 mm / 2.4 x 1.8 x 1.2 in Installation To install the controller, connect it to the circuit and power supply. The digital display will show the starting temperature of the current humidity setting. Operation To adjust the humidity, press the "up" button to display the starting temperature. Press and hold the "up" button for approximately 3 seconds to flash the starting humidity number, which you can adjust using the up and down buttons. To adjust the humidity stop, press and hold the "down" button for 3 seconds to stop the digital display from flashing. To restore factory settings, press and hold the up and down buttons simultaneously while the device is powered on until the digital display shows 888. Other information: Package list: 1 x Digital Humidity Controller. Note: Do not power on if the output end is not properly connected to avoid unnecessary problems.