XH-W3005 Digital Hygrometer Switching Controller with Humidity Sensor 0–99% RH, 220 V

General Description The XH-W3005 digital humidity sensor is a high-quality, durable, and user-friendly controller. It features a simple two-button control panel for easy setup. With a measurement accuracy of 0.1%, it provides easily readable data and offers a wide relative humidity measurement range of 0% to 99% RH, making it suitable for many applications. Technical Specifications Model: XH-W3005 Weight: 68 g / 2.4 oz Input Voltage: 12 V, 24 V, 220 V (optional) Humidity Range: 0% ~ 99% RH Humidity Control Accuracy: 0.1% RH Power: 120 W / 240 W / 1500 W Output Type: Direct Output Hole Spacing: 73 mm / 2.9 in Dimensions: 60 x 45 x 31 mm / 2.4 x 1.8 x 1.2 inches Installation Connect the controller to the circuit board and power supply for installation. The digital display shows the starting temperature and the currently set humidity. Usage To use the controller: Press the "Up" button to display the starting temperature. Hold the "Up" button for approximately 3 seconds until the starting humidity flashes. This can be adjusted using the "Up" and "Down" buttons. To set the final humidity, press the "Down" button to display the final humidity, and then hold the button for approximately 3 seconds until the display stops flashing. To reset the unit to factory settings, press and hold the "Up" and "Down" buttons simultaneously while the unit is powered on. The digital display shows 888 and then automatically switches to the humidity reading. Further information: Package contents: 1 x Digital Humidity Controller. Note: The W3005 is a direct output, not a dual output. The device will not turn on if the output is not connected correctly.