XM18 Automatic Incubator Temperature Controller, LED Color Display Temperature Control Equipment, 160-220V

1. Humanized four-screen display design, clear digital display, and easier control.
2. Precise humidity sensor, strong anti-interference capability, long service life, and high working stability.
3. Intelligent temperature and humidity control with matching professional sensors.
4. Automatically turns eggs throughout the entire process and automatically triggers an alarm when the temperature exceeds the limit.
5. Equipped with the latest microelectronic technology design and new components, accurate and reliable.

Specification:

Item Type: Temperature Controller.
Model: XM-18
Material: Plastic
Application: Suitable for aquaculture and plantation industries with extremely high ambient temperature requirements. It has a wide temperature control range and an overheat and limit alarm function.
Measurement object: Air, water
Temperature range: 0-99℃
Temperature measurement error: ±0.1℃
Humidity range: 0-99%
Humidity measurement error: ±3%
Hole size: approx. 155x76mm / 6.1x3.0in
Installation Type: Built-in
Operating Voltage: 160-220V
Number of Output Channels: 7 channels (overheating, temperature control, underheating, egg rotation, right-hand rotation, humidity control, alarm)
Output Current: Temperature control, underheating egg rotation: 999 times can be recorded
Egg Rotation Cycle: 0 to 999 minutes (factory setting is 90 minutes).
Egg Rotation Time: 0 to 999 seconds (factory setting is 180 seconds).
Ventilation Cycle: 0 to 999 minutes (factory setting is 120 minutes)
Ventilation Time: 0 to 999 seconds (factory setting is 15 seconds)
Measuring line length: 2m / 6.6ft

How to use:

1. Press and hold the "Mode" button (release after approximately 5 seconds). The chicken indicator light will illuminate, and the incubator will enter egg hatching mode. If you need to incubate more eggs, continue pressing the "Mode" button (releasing after approximately 5 seconds) and cycle through the five incubation modes: duck, goose, pigeon, pheasant, and custom constant temperature incubation. 2. To restore factory settings: Press and hold the "Reset" button for 5 seconds. The controller will display all "8"s, and the factory settings will be successfully restored after a beep.

Package List:

1 x Temperature Controller.

1 x Temperature Probe

1 x Humidity Probe

1 x Manual

Note:

Without Wi-Fi control