XY-DT01 Digital Temperature Controller -40-110 Celsius Micro-Digital Thermostat with LCD Screen and Waterproof Sensor

[Easy to Use]: The temperature range of this temperature controller is -40 to 110 degrees Celsius. Convenient to set and adjust, with an HD LCD screen and 4 buttons. This is a relay-based temperature controller; you will need to connect an additional power supply for operation. [30A High Current Relay]: High power: 220V 30A. It can be used with high-power equipment such as refrigerators, incubators, fermenters, greenhouses, etc. Connect the power supply and the heating/cooling equipment, insert the probe, and set the temperature; it will work perfectly. [Heating/Cooling Function]: "H" heating mode: When the detected temperature is lower than the set temperature (hysteresis temperature), the relay is activated and the heating equipment begins to operate. When the detected temperature is higher than the set temperature, the relay is deactivated and the heating equipment stops operating. The principle of the 'C' cooling mode is the same. [Delayed Start and Temperature Correction Function]: Delayed Start 'OPH': When a heating or cooling task is completed, the system starts a time delay 'T'. When T is greater than OPH, the system can perform the next series of heating or cooling tasks. Temperature Correction 'OFE' (-10.0-10.0 Celsius): When the system operates for a long period, there may be deviations, which can be corrected by this function. Actual temperature = measured temperature + calibration value. [High Temperature Alarm Function]: When the actual temperature is higher than the alarm temperature, the system activates the audible and visual alarm and disconnects the relay. Press any button to stop the alarm and light. Operating steps: 1. Connect the sensor to the controller. 2. Connect the power supply to the controller. 3. Set the start temperature, stop temperature, and temperature correction. 4. Remove the power supply. 5. Connect the power supply to the load at the relay output terminal if required in step 5. 6. Reconnect the controller's power supply. 7. Test and it works! Color: As shown Material: Plastic Package Contents: 1 x XY-DT01 Digital Temperature Controller Only the above package content, other products are not included. Note: Light shooting and different displays may cause the item's color to be slightly different from the real thing. The measurement allowed error is +/- 1-3 cm.