1/5
Zvs Coil Flyback Driver Board, Flyback Transformer, Marx High Voltage Flyback Transformer Generator, 12-36V.
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi and 1 other seller
You may also like
Compare with similar items
Product information
Description
1. Input 12-36VDC (24V recommended), high-voltage DC output, voltage approximately 1000 times the input voltage.
2. Flyback drive circuit, used to drive the ignition coil, similar to zero-voltage switching; these fans are called ZVS circuits.
3. The 12V input can reach a power of 50-100W, the 24V input can reach over 200W, therefore requiring a supply current greater than 10A.
4. Due to their power, low heat, simplicity, and reliability, these fans are widely used in spark gap ignition coil (SGTC) drives and for Jacob/Ladders/Marx generators, etc.
5. This power coil and ignition coil have been safety tested, are safe and reliable, and you can use them with confidence.
Specification:
Features:
Input 1.12-36 VDC (24V recommended), high-voltage DC output,
voltage of the input voltage approximately 1000 times. The 12V input can
reach a power of 50-100W, the 24V input can reach a maximum of over 200W, so request
the best power supply current in excess of 10A.
2. Flyback control circuit, which is used to drive the ignition coil, as the voltage switching does at 0, fans are called ZVS circuits. Due to their power, low heat generation, simplicity, and reliability, these fans are widely used in ignition interval coils (SGTC) and for Jacob/Ladders/Marx generators, etc.
Package Contents:
1 x ZVS Coil Driver Board
1 x Ignition Coil
2. Flyback drive circuit, used to drive the ignition coil, similar to zero-voltage switching; these fans are called ZVS circuits.
3. The 12V input can reach a power of 50-100W, the 24V input can reach over 200W, therefore requiring a supply current greater than 10A.
4. Due to their power, low heat, simplicity, and reliability, these fans are widely used in spark gap ignition coil (SGTC) drives and for Jacob/Ladders/Marx generators, etc.
5. This power coil and ignition coil have been safety tested, are safe and reliable, and you can use them with confidence.
Specification:
Features:
Input 1.12-36 VDC (24V recommended), high-voltage DC output,
voltage of the input voltage approximately 1000 times. The 12V input can
reach a power of 50-100W, the 24V input can reach a maximum of over 200W, so request
the best power supply current in excess of 10A.
2. Flyback control circuit, which is used to drive the ignition coil, as the voltage switching does at 0, fans are called ZVS circuits. Due to their power, low heat generation, simplicity, and reliability, these fans are widely used in ignition interval coils (SGTC) and for Jacob/Ladders/Marx generators, etc.
Package Contents:
1 x ZVS Coil Driver Board
1 x Ignition Coil
Features
- BrandOTHERS
- Height1 cm
- Width1 cm
- Length1 cm
- MaterialPlaster
- Weight100 g
- Power25 W
- Voltage10 V
- ManoMano ReferenceME220741952
- MMID130901703911
- Product codeBT-UK2025YS-67378
- EAN9140747287782
You are here:
'/%3E%3C/svg%3E){kind=small}