Chainsaw accessories

OLEO MAC 947 952 GS520 EFCO 147 152 Air Filter 50070036A, paper filter element, suitable for OLEO/EFCO chainsaws.

Set of 2 Chainsaw Fuel Tank Caps for STIHL MS171 MS181 MS192T MS210 MS200T MS211 MS230 MS240 MS250 MS260 MS340, Chainsaw Oil Cap Assembly

Sprocket right of drum clutch 1121 640 2001, Kit assembly of chainsaw of replacement for Stihl MS271 MS291 MS261 MS261C

Screw of adjustment of the tensioner of bar of saw to chain, 10 pieces, suitable to HUSQVARNA 288 281 272 XP 268 266

Chainsaw accessory. Replacement ignition coil module for STIHL Ms270 Ms280 MS 270 280 chainsaw 1133 400 1350.

Clutch Kit Sprocket Fit Stihl 017 018 021 023 025 MS170 MS180 MS210 MS230 MS250 MS250.

Applies to Husqvarna 340 345 350 petrol saws, chainsaws and chainsaws with ignition stop switch.--DTEKGAZ

Suitable for Husqvarna 365 372 385 390 chainsaws, clutch needle bearings, guide rollers, needle bearing parts - clutch assembly repair parts.--DTEKGAZ

Fuel hose sets for STIHL petrol chainsaws of the MS044, 046, MS341, MS361, MS440 and MS460 series--DTEKGAZ

Suitable for Husqvarna chainsaws 365, 372, 385, 390, 394, 395, 450 and 445. Includes oil filters, oil strainers, oil suction heads and accessories for petrol chainsaws.--DTEKGAZ

Suitable for Husqvarna 365 372 chainsaws: adjusting screw, carburetor adjusting screw, L-type needle, H-type needle, idle screw, carburetor screw, accessories for petrol chainsaws.--DTEKGAZ

Suitable for Husqvarna chainsaw clutches, needle bearings, clutch bearings and freewheel bearings.--DTEKGAZ

Throttle lever for Husqvarna petrol chainsaws of the 340, 345 and 350 series--DTEKGAZ

Suitable for Husqvarna chainsaw models 365, 372, 385, 390, 394 and 395: oil cap, fuel cap, fuel tank cap, oil tank cover and petrol tank cover.--DTEKGAZ

Suitable for cylinder block cover clips, air filter cover clips, spring clips, retaining clips, housing clips and accessories for Husqvarna 365 372 chainsaws.--DTEKGAZ

Suitable for Husqvarna 450 and 445 chainsaws, including clutch springs, clutch extension springs, clutch brake springs and small springs for chainsaw accessories.--DTEKGAZ

Suitable for Husqvarna 450 and 445 petrol chainsaws: throttle cable, throttle release cable, throttle cable and carburetor control cable.--DTEKGAZ

Applicable to Husqvarna 365 372 chainsaw clips, air filter clips, air filter cover clips, cylinder block cover clips, mounting clips and spring clips.--DTEKGAZ

Suitable for oil, fuel and gasoline line connections of the STIHL models MS290, 310 and 390.--DTEKGAZ

Fuel line kit for Husqvarna petrol chainsaws of the 340, 345, 350, 362, 365, 371 and 372 series--DTEKGAZ

Suitable for Husqvarna 450 and 445 chainsaws: ignition switch, stop switch, push button chainsaw switch and spare parts for petrol chainsaws.--DTEKGAZ

Compatible with the STIHL MS362 petrol chainsaw: Damping valve, shock absorber bushing, front damping valve, genuine replacement part for engine damper, part number 1128 141 9000--DTEKGAZ

Suitable for fuel lines, oil lines and accessories of the Husqvarna chainsaws 435, 440, 450 and 445.--DTEKGAZ

Oil filters for STIHL MS660, MS361, MS661 and MS651 series petrol chainsaws--DTEKGAZ

High-performance replacement parts for clutch needle bearings, crankshaft output bearings and starter bearings of the STIHL petrol chainsaws MS361 and MS362.--DTEKGAZ

Tension adjustment screw for the guide plate of the STIHL MS171, MS181 and MS211 series petrol chainsaws--BIEMMEDUE

2 pieces fuel cap and oil cap for STIHL 017 018 MS170 MS180 chainsaw, chainsaw accessories

Coil ignition for chainsaw Stihl MS170 MS180 017 018 Sparks reliable for start Compatible with models MS170C MS180C

Elastostart handle and starter cord with 4.5 mm cord for TS400, TS410, TS420

Red Starter Needle for 25cc Pruning Chainsaw, Start Pulling

replacement oil and fuel caps for STHIL MS200 MS210 MS230 MS240 MS250 MS260 chainsaws

Oil pump turbine 029 036 039 MS290 310 360 390 Worm gear 1125 640 7110, worm gear, drives the oil pump, suitable for Stihl chainsaws.

Zenoah G2500 center hole air intake manifold, rubber air intake hose, center hole design, suitable for Komatsu G2500 chainsaws.

Oil pump turbine 028 038 042 048 056 MS380 worm gear 1119 640 7100, worm gear, drives the oil pump, suitable for Stihl chainsaws.

RIM GBJ7S7 OREGON 11892 (.325-7 small) sprocket, clutch sprocket, .325 pitch, 7 teeth, small shaft diameter, suitable for chainsaws.

Husqvarna 142 H 142 Piston Kit Piston assembly (40 mm), including piston rings and pins, for repairing compression, suitable for Husqvarna 142 chainsaws.

MS230 250 260 290 310 360 380 381 440 660 Oil cap, plastic oil cap with sealing gasket, for adding oil, suitable for Stiletto chainsaws.

OLEO MAC 937 941 EFCO 137 141 Air filter, paper filter element, filters intake air, suitable for OLEO/EFCO chainsaws.

MS 360 Air intake manifold 1125 141 2200, rubber air intake hose, connects carburetor and cylinder, suitable for Stihl chainsaws.

OLEO MAC 937 941 EFCO 137 141 Air filter, paper filter element, filters intake air, suitable for OLEO/EFCO chainsaws.

MS230 250 260 290 310 360 380 381 440 660 Oil cap, plastic oil cap with sealing gasket, for adding oil, suitable for Stiletto chainsaws.

Fuel hose MS200 MS200T oil hose 1129 350 3600, rubber fuel hose, oil resistant, connects the carburetor and fuel tank, suitable for Stihl chainsaws.

Husqvarna 142 H 142 Piston Kit Piston assembly (40 mm), including piston rings and pins, for repairing compression, suitable for Husqvarna 142 chainsaws.

MS 360 Air intake manifold 1125 141 2200, rubber air intake hose, connects carburetor and cylinder, suitable for Stihl chainsaws.

RIM GBJ7S7 OREGON 11892 (.325-7 small) sprocket, clutch sprocket, .325 pitch, 7 teeth, small shaft diameter, suitable for chainsaws.

Oil pump turbine 029 036 039 MS290 310 360 390 Worm gear 1125 640 7110, worm gear, drives the oil pump, suitable for Stihl chainsaws.

Zenoah G2500 center hole air intake manifold, rubber air intake hose, center hole design, suitable for Komatsu G2500 chainsaws.

Oil pump turbine 028 038 042 048 056 MS380 worm gear 1119 640 7100, worm gear, drives the oil pump, suitable for Stihl chainsaws.

Kit of 2 intake and exhaust gaskets for Stihl MS170 MS180 017 021 023 025 and MS210 chainsaws (references: 11301490600 and 11231290900)

Pair of Fuel Caps Oil Cap Fuel Tank Cap Chainsaw Parts Replacement Fuel Cap Compatible with Husqvarna 51 55 136 137 141 142

XVX Cache latéral de pignon d'embrayage de Frein de chaîne pour Husqvarna tronçonneuse 240 E 236 E 235 E NO. 525628901,

Clutch kit for chainsaws, replacement clutch compatible with Husqvarna 36/41/136/141/137/142/235/240. For Husqvarna owners.