1 piece HAD20B Automatic round float mechanical drain valve for condensate 1/2 BSP 400 L/h 20 bar

Features:1.This automatic compressed air condensate drain is very different from traditional mechanical automatic drains, which rely on continuous drip drainage.
2.The casing is made of cast aluminum alloy with a plastic powder-coated surface, making it corrosion-resistant.
3.The automatic drain is extremely reliable in operation, requiring no electricity, operating quietly, and causing no loss of compressed air.
4.The drain has a large drainage outlet that is not easily blocked; it is a new generation and an excellent choice for compressed air equipment.
5.This is a fairly stable drainer with excellent performance and a low failure rate.
Specifications:Description:
This automatic compressed air condensate drain is a mechanical automatic drain with a cast aluminum alloy shell and an internal floating ball drainage system.The drain outlet closes when the buoyancy of the drain is less than the weight of the floating ball plus the compressed air pressure; it opens when the buoyancy increases to drain the condensate.
Features:
This automatic compressed air condensate drain differs significantly from traditional mechanical automatic drains, which rely on continuous drip drainage.
The casing is made of cast aluminum alloy with a corrosion-resistant plastic powder coating.
The automatic drainer is extremely reliable in operation, requiring no electricity, making no noise, and eliminating compressed air loss.
The drainer has a large drainage outlet that is not easily blocked; This is a new generation and excellent choice for compressed air equipment drain valves. It is a fairly stable drain valve with excellent performance and a low failure rate. Specifications: Model: HAD20B Port Size: Inlet = Outlet = 1/2 BSP Maximum Pressure: 20 bar Maximum Temperature: 100°C Maximum Capacity: 400 L/H Weight: 602 g (approx.) Instructions: Before installing this drain valve, please use compressed air to remove impurities from the piping until it is completely clean.
Install this automatic drain valve under the equipment's drainage system; otherwise, condensate will accumulate and impair drainage.
Maintenance
Inspect the drain valve once a week.
Operating method: Open the manual drain valve to release water until compressed air from the equipment enters the drain. After a few seconds, close the valve.If the drained water exceeds 0.5 liters, there is a blockage and the drain must be thoroughly cleaned.
The internal parts should be removed and cleaned annually. When cleaning, you can use soapy water or dish soap; do not use solvents to avoid damaging the rubber fittings.
The package includes:
1 x Drain valve
1 x Hose fitting
Note:
Please note that the new and old types of this product will be sent randomly, and please ensure this is acceptable to you before ordering.